PRIXTON FENIX Manual page 4

EN
Connections
+ Connect your keyboard and mouse to a USB dock in your device (you do not have to
turn it off or install drivers)
+ The operating system will detect the keyboard / mouse automatically as a USB plug and
play device. This will take a few seconds, and your keyboard will be ready to use.
+ If the equipment does need to install a driver, your device's operating system will install
it automatically.
Lighting up the keyboard.
Press the key, which is between the AltGr and FN key, to turn on the keyboard
lighting.
Use the same lighting key to rotate between the different keyboard light modes.
Mouse
You can change the resolution by using the DPI button in the centre of the mouse.
Choose between 800, 1200, 2200 and 3000 DPI.
Headphones
+ Connect the TRRS 3.5 jack to your videogame console for audio + microphone.
+ Use the TRRS 3.5 to 3.5 Dual splitter to connect your headphones and microphone to
your PC separately.
+ Connect your headphones to a USB dock to turn the LCD lights on.
Note: the USB dock only provides light, it does not transmit audio signals.
Care
+ Do not expose the devices to high temperatures.
+ Do not use the equipment near water or on wet surfaces.
+ Avoid spilling liquids on your equipment, which may cause it to malfunction and void
the warranty.
+ Avoid hard impacts.
+ Keep dust and soil away from your equipment.
+ Clean your devices occasionally with a soft cloth and a cleaner for electronic equipment.
These technical and electrical specifications are those of typical units and may be
changed without prior notice in order to provide improved equipment.