LEGRAND Plexo 0 698 76L Manual

Plexo with Netatmo
TM
Weatherproof connected 150 W LED switch with neutral with
dimmer option
1. USE
150 W LED connected switch with neutral with dimmer option,
configured by default as ON/OFF (dimmer mode can be activated from
the Home + Control app).
Can be used in conjunction with one or more wireless light switches and/
or one or more mechanical push-buttons.
For local or remote control of your lighting.
With its IP55 weatherproofing, this product can be used to control a light
or electrical appliance in places where damp and dust can be an issue
(garage, cellar, workshop, kitchen, etc) as well as outdoors (terrace, etc).
To be fitted with a surface-mounting box or plate support for surface-
mounted or flush-mounted installation.
Easy to install in place of a standard switch.
2. RANGE
Product for use in conjunction with the "with Netatmo" starter pack.
Equipped with an LED indicator (configuration) and a RESET button
(concealed) used to return to factory settings
Grey
0 698 76L
3. DIMENSIONS (mm)
B
A B
85.5 85.5
Technical data sheet: F03477EN/00
128, av. du Maréchal-de-Lattre-de-Tassigny - 87045 LIMOGES Cedex - France
Tel: +33(0)5 55 06 87 87 - Fax: +33(0)5 55 06 88 88
www.legrandgroup.com
Anthracite
0 698 96L
C
D
C D
50 5
Updated:
4. CONNECTION
Terminal type: screw
Terminal capacity: 2 x 1.5 mm - 1 x 2.5 mm
2
Stripping length: 7 mm
Flat screwdriver: 3 mm
5. OPERATION
ON/OFF when pressed at the top and
dimming up when held down until released
LED indicator:
- useful during installation
- blue LED illumination function which can
ON/OFF when pressed at the bottom
and dimming down when held down
until released.
RESET button
used to return to factory settings
Cat. No(s): 0 698 76L/96L
2
be activated from the Home + Control app
Created: 20/09/2023
1/2