Roline 16.01.4145 Quick Start Manual

M.2 to SATA III SSD H/W adapter,
2x M.2 NGFF SSD, bootable and RAID-capable

1. Introduction

2.5-inch H/W adapter for the installation of two M. 2 SSDs (NGFF), bootable and RAID-
compatible and with 6Gbit/s SATA connection!

1.1. Features

6Gbps SATA III H/W RAID Controller
o
Converts 2x M.2 NGFF SATA based SSD to standard 2.5" 7mm SATA drive
o
Supports SATA I, SATA II, SATA III Host port
o
Supports SATA hot plug and booting
o
Supports 6Gbps, 3Gbps SATA based M.2 NGFF 80/60/42/30 mm SSD
o
M.2 NGFF type 2280-D5-B B Key Socket on board
o
Movable M.2 NGFF stand-off and multiple plated-holes support types 2280, 2260,
o
2242 and 2230 SSD
Supports dual-sided SSD module 1.5mm component height on the top and
o
bottom side
Supports H/W RAID 0, RAID1, SPAN (Big Drive) and PM (2Drives) Modes
o
Does not support PM (2Drives) Mode if SATA I or no Port Multiplier compatible
o
SATA Host connection
22 pin SATA (Signals and Power) male connector on board
o
2x M.2 SSD ACT LED
o
Transparent to the operating system, no driver required on Windows, Mac and
o
Linux
Hardware Jumper and Windows & Mac software GUI configure RAID modes
o
Provides Windows and Mac GUI to monitor RAID status
o
Includes 7mm height 2.5 " drive metal frame with 8 mounting holes and 4 HDD
o
screws
Compatible with 2.5" SATA drive dimension : 100.45mm x 69.85mm x 7mm
o
RAID1 can preserve the Content of Existing SSD to Mirror SSD for data safety of
o
Data Disk (OS Disk not support)
16.01.4145