Table of Contents
Advertisement
7. Do not expose the LCD module to direct sunlight or strong
ultraviolet rays for an extended period of time.
8. Do not store the LCD module below the temperature con-
ditions described in the specifications. Failure to do so
could result in freezing of the liquid crystal due to cold air
or loss of resilience or other damage.
Cleaning
Remove the power plug before cleaning.
Do not use solvents such as benzine or thinner to clean the TV.
– These solvents may distort the cabinet or damage its finish.
– If rubber or vinyl products remain in contact with the TV for a long time, a stain may result.
When the cabinet becomes dirty, clean it with a soft, dry cloth.
When the cabinet is very dirty.
– Use a damp cloth to wipe the cabinet clean.
– Finish with a dry cloth.
When cleaning the surface of the LCD display:
– Wipe the panel surface gently with a soft, dry cloth.
When dust has collected on the power plug connectors, remove the plug from the outlet and clean off the
dust.
This dust may cause a fire due to reduced insulation on the plug.
All manuals and user guides at all-guidesbox.com
9. Do not disassemble the LCD module. Such actions could
result in improper operation.
10. When transporting the LCD module, do not use packing
containing epoxy resin (amine) or silicon resin (alcohol or
oxim). The gas generated by these materials can cause
loss of polarity.
– 6 –
Advertisement
Table of Contents
