Advertisement
INPUT A
To monitor the input signals connected
to these con-
nectors, keep the INPUT select switch released (GA).
@® VIDEO IN connector (BNC type)
Connect to the video output of video equipment, such
as a VTR or acolor video camera.
@® 750 termination switch
@® VIDEO OUT connector (BNC type)
Loop-through output of the VIDEO IN connector. Con-
nect to the video input of a VTR or another monitor.
@® AUDIO IN connector (minijack)
Connect
to the audio output of a VTR or to a micro-
phone (through a suitable: microphone
amplifier).
@ AUDIO OUT connector (minijack)
Loop-through output of the AUDIO IN connector. Con-
nect to the audio input of a VTR or another monitor.
INPUT B
To
monitor
the input
signals
to these
connectors,
depress the INPUT select switch (=B).
@ VIDEO input/output connector (BNC type)
Connect to the video output of a VTR or a color video
camera.
When a TV tuner is connected to the TUNER connector
and the 75Q termination
switch @ is set to OFF, this
connector can-be used as a loop-through output of the
TUNER connector. Connect to the video input of a VTR
or another monitor.
:
@ 750 termination switch
Normally set this switch to ON. When both the TUNER
and VIDEO
connectors
are used together for a loop-
through connection, set the switch to OFF.
@ AUDIO input/output connector (minijack)
Connect
to the audio output of a VTR or to a micro-
phone (through a suitable microphone amplifier).
When a TV tuner is connected to the TUNER connector
and the 752 termination
switch @ is set to OFF, this
connector-can be used.as a loop-through output of the
TUNER connector. Connect to the audio input of a VTR
or another monitor.
@ TUNER connector (6-pin DIN)
Connect to the 6-pin DIN connector of a TV tuner. The
video and audio signals are supplied to the monitor and
the power from the monitor is fed to the tuner using a
single cable.
PVM-8020
VF-501
Note
The TUNER
input and the VIDEO/AUDIO
inputs @, ®
cannot be used simultaneously. When connecting a TV
tuner to the monitor, be sure to disconnect any input.
source equipment from the VIDEO and AUDIO connec-
tors, or vice versa.
@® R/G/B BKG (background) controls
Used for adjusting the white balance of the background.
@ RIG/B DRIVE controls
Used for adjusting the white balance at the white peak.
@ AC IN socket
Connect the supplied ac power cord.
@ Battery compartments
Insert the NP-1 battery pack.
@ EJECT buttons
Press the EJECT button upwards to remove the battery
pack.
—
@ OPERATE/CHARGE select switch
Normally set this switch to OPERATE.
To charge the
battery pack, set to CHARGE. The CHARGE indicator on
the front panel lights. When charging is complete, the
CHARGE
indicator
goes
out;
reset
the
switch
to
OPERATE.
@ EXT BATTERY (external battery) DC IN 12 V jack
Connect the optional DCC-16AW car battery cord.
Advertisement
