Advertisement
@ Carrying handle
@ POWER switch
To turn the
monitor on, depress the POWER
switch
(ON). To turn it off, press the switch again (OFF).
© BATT (power/battery) indicator
This indicator lights when the power is turned on. When
the rechargeable battery becomes weak, the indicator
flashes for about five minutes. Then it goes out, and the
power is automatically turned off.
@ PICTURE
control
Adjusts the
contrast, intensity and brightness simul-
taneously in the proper ratio.
@ BRIGHT (brightness) control
Adjusts the brightness. Normally set this control at the
center detent position.
@ COLOR control
Adjusts the color intensity of the picture. Clockwise
rotation makes it paler.
© HUE control
© SHARP (sharpness) control
@ V HOLD (vertical hold) control
If the picture rolls vertically, correct it with this control.
@ HV-DELAY switch
® B-ONLY (blue only) switch
PVM-8020
VF-501
@® SCAN mode select switch
@® INPUT select switch
Keep this switch released (1A) to monitor the signal
from the INPUT A connectors. Depress the switch (8)
to monitor the signal from the INPUT B connectors.
® CHARGE indicator
Lights during charging. When charging is compliers the
indicator goes out.
Advertisement
