1. Manuals
  2. Brands
  3. Gemtek Manuals
  4. Gateway
  5. GIoT Femto WLRGFM-100
  6. User manual

Gemtek GIoT Femto WLRGFM-100 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Document Number
QW_02_0022.004
GIoT Femto Cell
User Guide
Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GIoT Femto WLRGFM-100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Gemtek GIoT Femto WLRGFM-100

Summary of Contents for Gemtek GIoT Femto WLRGFM-100

  • Page 1 Document Number QW_02_0022.004 GIoT Femto Cell User Guide Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved...

  • Page 2: Table Of Contents

    1.5.4 DHCP ......................... 30 1.5.5 Diagnostic........................31 LORAWAN MODE........................34 GUI ......................34 DMIN ..........................35 TATUS 2.2.1 Overview ........................35 2.2.2 Routes ........................37 2.2.3 System Log ........................ 38 Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 3 Channel Scan ......................76 3.4.7 Channel Setting ......................76 3.4.8 GPS MAP ........................77 WAN ........................77 3.5.1 OTAA Status....................... 77 3.5.2 Node Parameters ....................... 78 3.5.3 OTAA ......................... 79 Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 4 Configuration ......................121 5.3.4 Network Server ......................121 5.3.5 Network Server Log ....................122 5.3.6 Channel Scan ......................122 5.3.7 Channel Setting ......................123 5.3.8 GPS MAP ......................... 124 .......................... 124 YSTEM Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 5 WAN ........................147 6.6.2 Wireless ........................149 6.6.3 LAN.......................... 150 6.6.4 DHCP ........................150 6.6.5 Diagnostic........................ 151 GLOSSARY AND REFERENCES ......................153 ..................153 EFINITIONS CRONYMS AND BBREVIATIONS ........................... 153 EFERENCE Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 6: Giot Femto Cell - Product Introduction

    - Heart beat for monitoring real time status - Various Internet connections: Ethernet, WiFi, 3G/4G dongle (via USB port) - Non-Line-of-Sight (NLOS) coverage - Self-installation and easy deployment - Superior receiving sensitivity Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 7: Product Details

    - WiFi repeater mode enabled and IP address obtained Blinking Orange Blinking WiFi radio disabled Green WiFi radio enabled Blinking WiFi Orange Blinking Green LoRa network server disconnected or LoRa Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 8: I/O Ports

    WAN port of the device USB Type-A For external 3G/4G dongle or firmware upgrade Reset to default (5 seconds to reset settings to Reset factory default) Mini USB Connected with USB power adapter Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 9: Product Specifications

    Built-in Wi-Fi antenna and one (1) external SMA LoRa 17 Antenna Type antenna 18 Indicators 4 LED indicators 19 Dimensions L:116 x W:91 x H:27 mm 20 Weight 160 g Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 10: Software Specification

    - Managed and configured by GIoT Network Management Remote System (GNMS) at GIoT mode Management - Auto-provisioning with public and private data model - Keepalive with CPU load, memory usage and in/out traffic Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 11: Lora Specification

    - EU 862~870 MHz - US 902~928 MHz - India 865~867 Frequency Range MHz Separated SKU - AS 923 MHz - CN 470~510 MHz Channel Band 125/500 8 uplink + 2 downlink Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 12: Regulatory Specification

    -142 dBm BW=125KHz with SF=10 * All the radio performance is validated from - 0 to 40 Regulatory Specification Item Standard Pending Telec Pending Pending Pending Reliability Specification Item Specification MTBF 300,000 @ 40 Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 13: Giot Femto Cell - Webui User Guide

    Connect to Femto Cell via wifi (SSID: AP-last 6 digits of mac address) Access Femto Cell WebUI via IP address “192.168.55.1”. Default username is “admin” and password is "admin“. Figure 1.1-A Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 14: Status

    The contents are exhibited in one single page. Please scroll down the Status page to obtain an overall view. Figure 1.2.1-A System Status Figure 1.2.1-B Memory Usage and Network Settings Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 15 An “AUTO REFRESH ON/OFF” button is lodged on the top right of the panel This function enables the status data to be refreshed every 5 seconds. Status will auto refresh in 5 secs if “Auto Refresh ON” button is on. Figure 1.2.1-D Status Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 16: Routes

    Click “AUTO REFRESH ON/OFF” button to enable/ disable auto refresh. Figure 1.2.1-E Status 1.2.2 Routes The purpose of this category is to view the ARP table and active IPv4 routes information. Figure 1.2.2-A ARP table and Active IPv4 Routes Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 17: System Log

    1.2.3 System Log This category is to view system log information. Figure 1.2.3-A System Log 1.2.4 Kernel log This category is to view kernel log information. Figure 1.2.4-A Kernel Log Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 18: Processes

    This category is further divided into the following sectors: Load, Traffic, and Connections. These options are lodged and labeled above the graph. 1.2.6.1 Realtime Load To view the current load value and average of different time intervals. Figure 1.2.6.1-A Realtime Load Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 19 1.2.6.2 Realtime Traffic To view the network traffic of each interface. Figure 1.2.6.2-A Realtime Traffic 1.2.6.3 Realtime Connections To view the currently active network connections. Figure 1.2.6.3-A Realtime Connections Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 20: Giot

    The purpose of this category is to view GIoT information as in its provision code, gateway type, gateway ID or LoRa modules, channels, spreading factor, and GPS status. Figure 1.3.1-A GIoT Info Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 21: Provision

    The latitude and longitude coordinates can be manually embedded in this page. Click “SAVE LOCATION” button after inserting the coordinates or click “SELECT ON MAP” button to be redirected to the map in GPS Settings. Figure 1.3.3-A GIoT Management Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 22: Channel Scan

    To scan LoRa channel based on ISM regulation and export the result after the scan is completed. Figure 1.3.4-A Channel Scan 1.3.5 Channel Setting To setup Lora channel frequency. Figure 1.3.5-A Channel Setting Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 23: Gps Map

    Place a checkmark next to “Enable NTP Client” to synchronize the time with NTP server. If you choose to use another NTP server, please place a checkmark next to “Provide NTP server” and fill out the “NTP server candidates” text field. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 24 Figure 1.4.1-A System Properties Figure 1.4.1-B Time Synchronization Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 25: Administration

    Femto configuration can be restored and reset to default on this page. Click “GENERATE ARCHIVE” button to download the configuration file with the current gateway settings. Note: LoRa configuration cannot be restored and reset to default on this page. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 26 Please note that the LoRa provision settings will NOT be reset by this action. Figure 1.4.3-B Backup/Restore Choose the most recent backup file and click “UPLOAD ARCHIVE” to restore the configuration file. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 27: System Firmware

    OTA server, click “UPGRADE NOW” button to upgrade the newest system firmware from OTA server. Figure 1.4.4-A System Firmware 1.4.5 Reboot Click “PERFORM REBOOT” to reboot Femto. Figure 1.4.5-A Reboot Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 28: Network

    PPPoE. The three different options can be selected in the drop- down menu in “Wan Type”. Please fill in the respective fields exhibited under each selection. Please make sure the Ethernet cable is connected to a WAN port. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 29 Figure 1.5.1.1-A Static IP Figure 1.5.1.1-B DHCP Client Figure 1.5.1.1-C PPPoE Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 30 To activate the extended wireless connection, please select “Enable” from the Extender mode drop-down menu. Click the “SCAN” button to obtain the list of available Access Points within your surrounding vicinity. Figure 1.5.1.3-A Wireless Extender Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 31: Wireless

    You can manage detailed DHCP server settings, which include First leased address, the allowed Number of leased addresses and Lease time. Information on Active Leases can be viewed at the bottom of this page. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 32: Diagnostic

    TRACEROUTE and NSLOOKUP. Please see the following for input guidelines. 1.5.5.1 PING Input a specific IP address in the text field above “PING”. Click the “PING” button to ping the IP you have specified. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 33 Figure 1.5.5.1-A PING 1.5.5.2 TRACEROUTE Input a specific URL or IP address above “TRACEROUTE”. Click the “TRACEROUTE” button to trace the URL or IP address you have specified. Figure 1.5.5.2-A TRACEROUTE Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 34 Input a specific URL or IP address above “NSLOOKUP”. Click the “NSLOOKUP” button to view the DNS server of the URL or IP address you have specified. Figure 1.5.5.3-A NSLOOKUP Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 35: Lorawan Mode

    Connect to Femto Cell via wifi (SSID: AP-last 6 digits of mac address) Access Femto Cell WebUI via IP address “192.168.55.1”. Default username is “admin” and password is "admin“. Figure 2.1-A Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 36: Status

    The contents are exhibited in one single page. Please scroll down the Status page to obtain an overall view. Figure 2.2.1-A System Status Figure 2.2.1-B Memory Usage and Network Settings Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 37 An “AUTO REFRESH ON/OFF” button is lodged on the top right of the panel This function enables the status data to be refreshed every 5 seconds. Status will auto refresh in 5 secs if “Auto Refresh ON” button is on. Figure 2.2.1-D Status Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 38: Routes

    Click “AUTO REFRESH ON/OFF” button to enable/ disable auto refresh. Figure 2.2.1-E Status 2.2.2 Routes The purpose of this category is to view the ARP table and active IPv4 routes information. Figure 2.2.2-A ARP table and Active IPv4 Routes Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 39: System Log

    2.2.3 System Log This category is to view system log information. Figure 2.2.3-A System Log 2.2.4 Kernel log This category is to view kernel log information. Figure 2.2.4-A Kernel Log Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 40: Processes

    This category is further divided into the following sectors: Load, Traffic, and Connections. These options are lodged and labeled above the graph. 2.2.6.1 Realtime Load To view the current load value and average of different time intervals. Figure 2.2.6.1-A Realtime Load Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 41 2.2.6.2 Realtime Traffic To view the network traffic of each interface. Figure 2.2.6.2-A Realtime Traffic 2.2.6.3 Realtime Connections To view the currently active network connections. Figure 2.2.6.3-A Realtime Connections Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 42: System

    If you choose to use another NTP server, please place a checkmark next to “Provide NTP server” and fill out the “NTP server candidates” text field. Figure 2.3.1-A System Properties Figure 2.3.1-B Time Synchronization Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 43: Administration

    Femto configuration can be restored and reset to default on this page. Click “GENERATE ARCHIVE” button to download the configuration file with the current gateway settings. Note: LoRa configuration cannot be restored and reset to default on this page. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 44 Figure 2.3.3-A Backup/Restore Click “PERFORM RESET” button to reset the firmware to its initial state. Please note that the LoRa provision settings will NOT be reset by this action. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 45: System Firmware

    Once a new system firmware version is detected on the OTA server, click “UPGRADE NOW” button to upgrade the newest system firmware from OTA server. Figure 2.3.4-A System Firmware Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 46: Reboot

    The purpose of this category is to view GIoT information as in its Provision Code, Gateway Type, Gateway ID or LoRa Modules, Channels, Spreading Factor, and GPS Status. Figure 2.4.1-A GIoT Info Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 47: Provision

    The latitude and longitude coordinates can be manually embedded in this page. Click “SAVE LOCATION” button after inserting the coordinates or click “SELECT ON MAP” button to be redirected to the map in GPS Settings. Figure 2.4.3-A GIoT Management Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 48: Network Server

    (read only) Downlink ACK: The subscription topic of the broker established for downlink ack. (read only) Port: Displays the port number that is being used. (read only) Figure 2.4.4-A Network Server Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 49: Network Server Log

    Displays the log that is connected to the broker. Figure 2.4.5-A Network Server Log 2.4.6 Channel Scan To scan LoRa channel based on ISM regulation and export the result after the scan is completed. Figure 2.4.6-A Channel Scan Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 50: Channel Setting

    Once the location is confirmed, the system will verify and apply the new Latitude/Longitude coordinates into its GPS setting. Figure 2.4.8-A GPS Setting Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 51: Lorawan

    Latest Update Time: The last time an uplink data was sent (sync per hour) 2.5.2 Node Parameters The purpose of this category is to view node parameters, which include DevAddr, Rx1DrOffset, Rx2DataRate, Delay, Rx2Freq and LastDownMsgSeqNo. Figure 2.5.2-A Node Parameters Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 52: Otaa

    Aging Out Time(Minutes): If the Node hasn't sent an uplink message within the aging out time limit, the allocated OTAA DevAddr will become expired and released. Note: The Aging Out Time must be at least 60 minutes. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 53 AppEUI Start, AppEUI Counts , DevEUI Start , DevEUI Counts , Devaddr Start, Devaddr Counts, Appkey and Aging Out Time then click “SAVE” to edit the OTAA rule. User will leave OTAA Edit page after clicking “CANCEL”. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 54: Abp

    The main function of this feature is to add/delete/edit ABP rule entries on this page. The ABP menu consists of the following categories: INDIVIDUAL and NETID GROUP. 2.5.4.1 INDIVIDUAL Click “INDIVIDUAL” button to enter the INDIVIDUAL function page. Figure 2.5.4.1-A INDIVIDUAL Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 55 AppSKey CRC: The CRC value of app session key. Figure 2.5.4.1-B INDIVIDUAL Add To delete entries, select one or more ABP (INDIVIDUAL) rule entries and click “DELETE” button. Figure 2.5.4.1-C INDIVIDUAL Delete Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 56 User will leave ABP Edit page after clicking “CANCEL”. Figure 2.5.4.1-D INDIVIDUAL Edit 2.5.4.2 NETID GROUP Click “NETID GROUP” button to enter the NETID GROUP function page. Figure 2.5.4.2-A NETID GROUP Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 57 AppSKey CRC: The CRC value of app session key. Figure 2.5.4.2-B NETID GROUP Add To delete entries, select one or more ABP (NETID GROUP) rule entries and click “DELETE” button. Figure 2.5.4.2-C NETID GROUP Delete Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 58: Network

    This category is further divided into three sectors: Ethernet Wan, 3G/4G LTE and Wireless Extender. These individual options are lodged and labeled above the main content panel. Figure 2.6.1-A WAN Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 59 “wantype”. Please fill in the respective fields exhibited under each selection. Please make sure the Ethernet cable is connected to a WAN port. Figure 2.6.1.1-A Static IP Figure 2.6.1.1-B DHCP Client Figure 2.6.1.1-C PPPoE Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 60 To activate the extended wireless connection, please select “Enable” from the Extender mode drop-down menu. Click the “SCAN” button to obtain the list of available Access Points within your surrounding vicinity. Figure 2.6.1.3-A Wireless Extender Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 61: Wireless

    You can manage detailed DHCP server settings, which include First leased address, the allowed Number of leased addresses and Lease time. Information on Active Leases can be viewed at the bottom of this page. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 62: Diagnostic

    TRACEROUTE and NSLOOKUP. Please see the following for input guidelines. 2.6.5.1 PING Input a specific IP address in the text field above “PING”. Click the “PING” button to ping the IP you have specified. Figure 2.6.5.1-A PING Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 63 Input a specific URL or IP address above “NSLOOKUP”. Click the “NSLOOKUP” button to view the DNS server of the URL or IP address you have specified. Figure 2.6.5.3-A NSLOOKUP Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 64: Education Mode

    Connect to Femto Cell via wifi (SSID: AP-last 6 digits of mac address) Access Femto Cell WebUI via IP address “192.168.55.1”. Default username is “admin” and password is "admin“. Figure 3.1-A Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 65: Status

    The contents are exhibited in one single page. Please scroll down the Status page to obtain an overall view. Figure 3.2.1-A System Status Figure 3.2.1-B Memory Usage and Network Settings Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 66 This function enables the status data to be refreshed every 5 seconds. The status will auto refresh in 5 secs if “Auto Refresh ON” button is on. Figure 3.2.1-D Status Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 67: Routes

    Click “AUTO REFRESH ON/OFF” button to enable/ disable auto refresh. Figure 3.2.1-E Status 3.2.2 Routes The purpose of this category is to view the ARP table and active IPv4 routes information. Figure 3.2.2-A ARP table and Active IPv4 Routes Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 68: System Log

    3.2.3 System Log This category is to view System Log information. Figure 3.2.3-A System Log 3.2.4 Kernel Log This category is to view Kernel Log information. Figure 3.2.4-A Kernel Log Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 69: Processes

    This category is further divided into the following sectors: Load, Traffic, and Connections. These options are lodged and labeled above the graph. Realtime Load 3.2.6.1 To view the current load value and average of different time intervals. Figure 3.2.6.1-A Realtime Load Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 70 3.2.6.2 Realtime Traffic To view the network traffic of each interface. Figure 3.2.6.2-A Realtime Traffic 3.2.6.3 Realtime Connections To view the currently active network connections. Figure 3.2.6.3-A Realtime Connections Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 71: System

    If you choose to use another NTP server, please place a checkmark next to “Provide NTP server” and fill out the “NTP server candidates” text field. Figure 3.3.1-A System Properties Figure 3.3.1-B Time Synchronization Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 72: Administration

    Click “GENERATE ARCHIVE” button to download the configuration file with the current gateway settings. Note: LoRa configuration cannot be restored and reset to default on this page. Figure 3.3.3-A Backup/Restore Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 73: Reboot

    Please note that the LoRa provision settings will NOT be reset by this action. Figure 3.3.3-B Backup/Restore Choose the most recent backup file and click “UPLOAD ARCHIVE” to restore the configuration file. 3.3.4 Reboot Click “PERFORM REBOOT” to reboot Femto. Figure 3.3.4-A Reboot Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 74: Giot

    Code, Gateway Type, Gateway ID or LoRa Modules, Channels, Spreading Factor, and GPS Status. Figure 3.4.1-A GIoT Info 3.4.2 Provision GIoT provision code can be set up on this page. Figure 3.4.2-A Provision Code Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 75: Configuration

    Subscribe topic: The subscription topic of the broker established for uplink. (read only) Downlink ACK: The subscription topic of the broker established for downlink ack. (read only) Port: Displays the port number that is being used. (read only) Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 76: Network Server Log

    Figure 3.4.4-A Network Server 3.4.5 Network Server Log Displays the log that is connected to the broker. Figure 3.4.5-A Network Server Log Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 77: Channel Scan

    To scan LoRa channel based on ISM regulation and export the result after the scan is completed. Figure 3.4.6-A Channel Scan 3.4.7 Channel Setting To setup the Center Frequency for LoRa on this page. Figure 3.4.7‑A Channel Setting Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 78: Gps Map

    The purpose of this category is to view the process status of a node joining Network Server via OTAA, include DevAddr, Device EUI, App EUI, OTAA Group Index and Latest Update Time. Figure 3.5.1-A OTAA Status Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 79: Node Parameters

    Rx1DrOffset: The downlink data rate offset of Rx1. Rx2DataRate: The downlink data rate of Rx2. Delay: The delay between TX and RX. Rx2Freq: The downlink frequency of RX2. LastDownMsgSeqNo: The number of downlink data sent. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 80: Otaa

    Aging Out Time(Minutes): If the Node hasn't sent an uplink message within the aging out time limit, the allocated OTAA DevAddr will become expired and released. Note: The Aging Out Time must be at least 60 minutes. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 81 AppEUI Start, AppEUI Counts , DevEUI Start , DevEUI Counts , Devaddr Start, Devaddr Counts, Appkey and Aging Out Time, then click “SAVE” to edit the OTAA rule. User will leave OTAA edit page after clicking “CANCEL”. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 82: Abp

    Click “ADD” button to enter ABP add page and input DevAddr, NwkSKey and AppSKey, then click “SAVE” to create an ABP (INDIVIDUAL) rule. User will leave ABP Add page after clicking “CANCEL”. Definitions for ABP (INDIVIDUAL) Fields are listed as follows: Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 83 AppSKey CRC: The CRC value of app session key. Figure 3.5.4.1-B INDIVIDUAL Add To delete entries, select one or more ABP (INDIVIDUAL) rule entries and click “DELETE” button. Figure 3.5.4.1-C INDIVIDUAL Delete Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 84 Click “NETID GROUP” button to enter the NETID GROUP function page. Figure 3.5.4.2-A NETID GROUP Note: Please note that there is a default ABP (NETID GROUP) rule which cannot be deleted or edited. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 85 AppSKey CRC: The CRC value of app session key. Figure 3.5.4.2-B NETID GROUP Add To delete entries, select one or more ABP (NETID GROUP) rule entries and click “DELETE” button. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 86: Network

    Figure 3.5.4.2-D NETID GROUP Edit 3.6 Network The System menu consists of the following categories: WAN, Wireless, LAN, DHCP, and Diagnostics. Introduction and input procedures for each category are described in the following paragraphs. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 87: Wan

    “wantype”. Please fill in the respective fields exhibited under each selection. Please make sure the Ethernet cable is connected to a WAN port. Figure 3.6.1.1-A Static IP Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 88 Figure 3.6.1.1-B DHCP Client Figure 3.6.1.1-C PPPoE 3.6.1.2 3G/4G LTE This page is to setup required information. Note: Make sure the SIM card is installed. Figure 3.6.1.2-A 3G/4G LTE Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 89: Wireless

    Access Points within your surrounding vicinity. Figure 3.6.1.3-A Wireless Extender 3.6.2 Wireless 2.4G Interface Configuration to setup 2.4G wireless. SSID, encryption type, and channels can be lodged within this sector. Figure 3.6.2-A Wireless Setting Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 90: Lan

    Information on Active Leases can be viewed at the bottom of this page. Figure 3.6.4-A DHCP 3.6.5 Diagnostic Diagnostics is divided into three parts on the same page: PING, TRACEROUTE and NSLOOKUP. Please see the following for input guidelines. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 91 Figure 3.6.5.1-A PING 3.6.5.2 TRACEROUTE Input a specific URL or IP address above “TRACEROUTE”. Click the “TRACEROUTE” button to trace the URL or IP address you have specified. Figure 3.6.5.2-A TRACEROUTE Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 92 Input a specific URL or IP address above “NSLOOKUP”. Click the “NSLOOKUP” button to view the DNS server of the URL or IP address you have specified. Figure 3.6.5.3-A NSLOOKUP Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 93: Lorawan Bridge Mode

    Connect to Femto Cell via wifi (SSID: AP-last 6 digits of mac address) Access Femto Cell WebUI via IP address “192.168.55.1”. Default username is “admin” and password is "admin“. Figure 4.1-A Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 94: Status

    The contents are exhibited in one single page. Please scroll down the Status page to obtain an overall view. Figure 4.2.1-A System Status Figure 4.2.1-B Memory Usage and Network Settings Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 95 An “AUTO REFRESH ON/OFF” button is lodged on the top right of the panel This function enables the status data to be refreshed every 5 seconds. Status will auto refresh in 5 secs if “Auto Refresh ON” button is on Figure 4.2.1-D Status Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 96: Routes

    Click “AUTO REFRESH ON/OFF” button to enable/ disable auto refresh Figure 4.2.1-E Status 4.2.2 Routes The purpose of this category is to view the ARP table and active IPv4 routes information. Figure 4.2.2-A ARP table and Active IPv4 Routes Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 97: System Log

    4.2.3 System Log This category is to view system log information. Figure 4.2.3-A System Log 4.2.4 Kernel log This category is to view kernel log information. Figure 4.2.4-A Kernel Log Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 98: Processes

    This category is further divided into the following sectors: Load, Traffic, and Connections. These options are lodged and labeled above the graph. 4.2.6.1 Realtime Load To view the current load value and average of different time intervals. Figure 4.2.6.1-A Realtime Load Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 99 4.2.6.2 Realtime Traffic To view the network traffic of each interface. Figure 4.2.6.2-A Realtime Traffic 4.2.6.3 Realtime Connections To view the currently active network connections. Figure 4.2.6.3-A Realtime Connections Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 100: Giot

    The purpose of this category is to view GIoT information, as in its Provision Code, Gateway Type, Gateway ID or LoRa modules, Channels, Spreading Factor, and GPS Status. Figure 4.3.1-A GIoT Info Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 101: Provision

    Click “SAVE LOCATION” button after inserting the coordinates or click “SELECT ON MAP” button to be redirected to the map in GPS Settings. User can select Repeater-AP and Repeater on LoRa Configurations. Figure 4.3.3-A GIoT Management Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 102: Network Server

    Port: Displays the port number that is being used. (read only) Figure 4.3.4-A Network Server 4.3.5 Network Server Log Displays the log that is connected to the broker. Figure 4.3.5-A Network Server Log Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 103: Channel Scan

    To scan LoRa channel based on ISM regulation and export the result after the scan is completed. Figure 4.3.6-A Channel Scan 4.3.7 Channel Setting To set up LoRa channel frequency. Figure 4.3.7-A Channel Setting Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 104: Gps Map

    Place a checkmark next to “Enable NTP Client” to synchronize the time with NTP server. If you choose to use another NTP server, please place a checkmark next to “Provide NTP server” and fill out the “NTP server candidates” text field. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 105: Administration

    Figure 4.4.1-B Time Synchronization 4.4.2 Administration Femto login password can be configured in this page. Different languages can be applied according to usage (supports English and Simplified Chinese). Figure 4.4.2-A Router Password Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 106: Backup And Restore

    Figure 4.4.3-A Backup/Restore Click “PERFORM RESET” button to reset the firmware to its initial state. Please note that the LoRa provision settings will NOT be reset by this action. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 107: Reboot

    The purpose of this category is to view current WAN settings. This category is further divided into three sectors: Ethernet Wan, 3G/4G LTE and Wireless Extender. These individual options are lodged and labeled above the main content panel. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 108 “wantype”. Please fill in the respective fields exhibited under each selection. Please make sure the Ethernet cable is connected to a WAN port. Figure 4.5.1.1-A Static IP Figure 4.5.1.1-B DHCP Client Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 109 Figure 4.5.1.1-C PPPoE 4.5.1.2 3G/4G LTE This page is to setup required information. Note: Make sure the SIM card is installed. Figure 4.5.1.2-A 3G/4G LTE Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 110: Wireless

    Access Points within your surrounding vicinity. Figure 4.5.1.3-A Wireless Extender 4.5.2 Wireless 2.4G Interface Configuration to setup 2.4G wireless. SSID, Encryption Type, and Channels can be lodged within this sector. Figure 4.5.2-A Wireless Setting Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 111: Lan

    You can manage detailed DHCP server settings, which include First leased address, the allowed Number of leased addresses and Lease time. Information on Active Leases can be viewed at the bottom of this page. Figure 4.5.4-A DHCP Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 112: Diagnostic

    Figure 4.5.5.1-A PING 4.5.5.2 TRACEROUTE Input a specific URL or IP address above “TRACEROUTE”. Click the “TRACEROUTE” button to trace the URL or IP address you have specified. Figure 4.5.5.2-A TRACEROUTE Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 113 Input a specific URL or IP address above “NSLOOKUP”. Click the “NSLOOKUP” button to view the DNS server of the URL or IP address you have specified. Figure 4.5.5.3-A NSLOOKUP Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 114: Giot (Cn) Mode

    5. GIoT (CN) Mode 5.1 Open Admin GUI Access Femto WebUI via WAN IP address assigned by dhcp. Default username is “admin” and password is "admin“. Figure 5.1-A Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 115: Status

    The contents are exhibited in one single page. Please scroll down the Status page to obtain an overall view. Figure 5.2.1-A System Status Figure 5.2.1-B Memory Usage and Network Settings Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 116 Status will auto refresh in 5 secs if “Auto Refresh ON” button is on. Figure 5.2.1-D Status Click “AUTO REFRESH ON/OFF” button to enable/ disable auto refresh. Figure 5.2.1-E Status Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 117: Routes

    The purpose of this category is to view the ARP table and active IPv4 routes information. Figure 5.2.2-A ARP table and Active IPv4 Routes 5.2.3 System Log This category is to view system log information. Figure 5.2.3-A System Log Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 118: Kernel Log

    The purpose of this category is to view the system processes that are in progress. Processes can be hung up, terminated, and killed for each individual Femto Cell item. Figure 5.2.5-A Processes Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 119: Realtime Graphs

    To view the current load value and average of different time intervals. Figure 5.2.6.1-A Realtime Load 5.2.6.2 Realtime Traffic To view the network traffic of each interface. Figure 5.2.6.2-A Realtime Traffic Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 120 5.2.6.3 Realtime Connections To view the currently active network connections. Figure 5.2.6.3-A Realtime Connections Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 121: Giot

    Code, Gateway Type, Gateway ID or LoRa Modules, Channels, Spreading Factor, and GPS Status. Figure 5.3.1-A GIoT Info 5.3.2 Provision GIoT provision code can be setup on this page. Figure 5.3.2-A Provision Code Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 122: Configuration

    Subscribe topic: The subscription topic of the broker established for uplink. (read only) Downlink ACK: The subscription topic of the broker established for downlink ack. (read only) Port: Displays the port number that is being used. (read only) Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 123: Network Server Log

    Displays the log that is connected to the broker. Figure 5.3.5-A Network Server Log 5.3.6 Channel Scan To scan LoRa channel based on ISM regulation and export the result after the scan is completed. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 124: Channel Setting

    Figure 5.3.6-A Channel Scan 5.3.7 Channel Setting To setup the center frequency for LoRa on this page. Figure 5.3.7-A Channel Setting Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 125: Gps Map

    Place a checkmark next to “Enable NTP Client” to synchronize the time with NTP server. If you choose to use another NTP server, please place a checkmark next to “Provide NTP server” and fill out the “NTP server candidates” text field. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 126: Administration

    Figure 5.4.1-B Time Synchronization 5.4.2 Administration Femto login password can be configured in this page. Different languages can be applied according to usage (supports English and Simplified Chinese). Figure 5.4.2-A Router Password Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 127: Backup And Restore

    Figure 5.4.3-A Backup/Restore Click “PERFORM RESET” button to reset the firmware to its initial state. Please note that the LoRa provision settings will NOT be reset by this action. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 128: System Firmware

    Once a new system firmware version is detected on the OTA server, click “UPGRADE NOW” button to upgrade the newest system firmware from OTA server. Figure 5.4.4-A System Firmware Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 129: Reboot

    PPPoE. The three different options can be selected in the drop- down menu in “wantype”. Please fill in the respective fields exhibited under each selection. Please make sure the Ethernet cable is connected to a WAN port. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 130 Figure 5.5.1.1-A Static IP Figure 5.5.1.1-B DHCP Client Figure 5.5.1.1-C PPPoE Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 131: Lan

    You can manage detailed DHCP server settings, which include First leased address, the allowed Number of leased addresses and Lease time. Information on Active Leases can be viewed at the bottom of this page. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 132: Diagnostic

    TRACEROUTE and NSLOOKUP. Please see the following for input guidelines. 5.5.4.1 PING Input a specific IP address in the text field above “PING”. Click the “PING” button to ping the IP you have specified. Figure 5.5.4.1-A PING Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 133 Input a specific URL or IP address above “NSLOOKUP”. Click the “NSLOOKUP” button to view the DNS server of the URL or IP address you have specified. Figure 5.5.4.3-A NSLOOKUP Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 134: Packet Forward Mode

    The purpose of this category is to view the following contents: System Status, Memory Usage and Network Settings. The contents are exhibited in one single page. Please scroll down the Status page to obtain an overall view. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 135 Figure 6.2.1-A System Status Figure 6.2.1-B Memory Usage and Network Settings Figure 6.2.1-C DHCP Leases and Wireless Status Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 136 Status will auto refresh in 5 secs if “Auto Refresh ON” button is on. Figure 6.2.1-D Status Click “AUTO REFRESH ON/OFF” button to enable/ disable auto refresh. Figure 6.2.1-E Status Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 137: Routes

    The purpose of this category is to view the ARP table and active IPv4 routes information. Figure 6.2.2-A ARP table and Active IPv4 Routes 6.2.3 System Log This category is to view system log information. Figure 6.2.3-A System Log Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 138: Kernel Log

    The purpose of this category is to view the system processes that are in progress. Processes can be hung up, terminated, and killed for each individual Femto Cell item. Figure 6.2.5-A Processes Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 139: Realtime Graphs

    To view the current load value and average of different time intervals. Figure 6.2.6.1-A Realtime Load 6.2.6.2 Realtime Traffic To view the network traffic of each interface. Figure 6.2.6.2-A Realtime Traffic Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 140: System

    If you choose to use another NTP server, please place a checkmark next to “Provide NTP server” and fill out the “NTP server candidates” text field. Figure 6.3.1-A System Properties Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 141: Administration

    6.3.3 Backup and Restore Femto configuration can be restored and reset to default on this page. Click “GENERATE ARCHIVE” button to download the configuration file with the current gateway settings. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 142 Please note that the LoRa provision settings will NOT be reset by this action. Figure 6.3.3-B Backup/Restore Choose the most recent backup file and click “UPLOAD ARCHIVE” to restore the configuration file. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 143: System Firmware

    Figure 6.3.5-A Reboot 6.4 GIoT The GIoT menu consists of the following categories: Provision, Channel Scan and GPS MAP. 6.4.1 Provision GIoT provision code can be setup on this page. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 144: Channel Scan

    “Location” text field above the map or pinpoint your location on the map by dragging the red marker to the correct spot. Once the location is confirmed, the system will verify and apply the new Latitude/Longitude coordinates into its GPS setting. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 145: Packet Forward

    This page is to setup lora configuration, which include: Gateway ID, Network ID, Server Address, Server Uplink Port, Server Downlink Port, Keep Alive Interval, Statistics display Interval and Push Timeout. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 146: Radio 0

    Figure 6.5.2-A Radio 0 6.5.3 Radio 1 This page is to setup the radio 1 configuration of LoRa, which include: Status, Central Frequency, RSSI Offset, TX Status, Channel Status and Channel offset. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 147: Lbt Settings

    Figure 6.5.4-A LBT Settings 6.6 Network The System menu consists of the following categories: WAN, Wireless, LAN, DHCP and Diagnostics. Introduction and input procedures for each category are described in the following paragraphs. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 148: Wan

    “wantype”. Please fill in the respective fields exhibited under each selection. Please make sure the Ethernet cable is connected to a WAN port. Figure 6.6.1.1-A Static IP Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 149 Figure 6.6.1.1-B DHCP Client Figure 6.6.1.1-C PPPoE 6.6.1.2 3G/4G LTE This page is to setup required information. Note: Make sure the SIM card is installed. Figure 6.6.1.2-A 3G/4G LTE Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 150: Wireless

    Access Points within your surrounding vicinity. Figure 6.6.1.3-A Wireless Extender 6.6.2 Wireless 2.4G Interface Configuration to setup 2.4G wireless. SSID, encryption type, and channels can be lodged within this sector. Figure 6.6.2-A Wireless Setting Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 151: Lan

    You can manage detailed DHCP server settings, which include First leased address, the allowed Number of leased addresses and Lease time. Information on Active Leases can be viewed at the bottom of this page. Figure 6.6.4-A DHCP Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 152: Diagnostic

    “PING” button to ping the IP you have specified. Figure 6.6.5.1-A PING 6.6.5.2 TRACEROUTE Input a specific URL or IP address above “TRACEROUTE”. Click the “TRACEROUTE” button to trace the URL or IP address you have specified. Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...
  • Page 153 Input a specific URL or IP address above “NSLOOKUP”. Click the “NSLOOKUP” button to view the DNS server of the URL or IP address you have specified. Figure 6.6.5.3-A NSLOOKUP Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

  • Page 154: Glossary And References

    Activation by Personalization OTAA Over-The-Air Activation To Be Defined Reference Document Author LoRaWAN Specification v1.0.2 LoRa Alliance LoRaWAN Regional Parameters v1.0.2 LoRa Alliance LoRaWAN Backend Interfaces Specification v1.0 LoRa Alliance Copyright © 2018 Gemtek Technology Corporation. All Rights Reserved QW_02_0022.004...

Table of Contents