Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Gemtek WAPD-246ACN
Summary of Contents for Gemtek WAPD-246ACN
- Page 1 WAPD-246ACN LoRa Gateway User Manual Version : 1.0.2...
-
Page 2: Release History
Release History Release Data Release Version Description Author 2017/08/04 1.0.1 Initial release William Huang 2017/10/13 1.0.2 Add FW update William Huang instruction... -
Page 3: Gateway Configuration
Gateway Configuration Access gateway Administration Web GUI at :8080 port http://x.x.x.x:8080/ Default Username/Password : admin/admin If it is the first login, it will ask you to update the default account You may configure the account as admin/Admin123 After login, Dashboard page shows System Info. Firmware Version can... - Page 4 be checked at here. Go to “LoRa Module Status” to check band setting Go to “ABP Setting” page to configure ABP setting...
- Page 5 (ex. 12345678 / 12345678123456781234567812345678 / 12345678123456781234567812345678) Go to “Payload Broker Setting” page to check MQTT related settings...
- Page 6 User can use “GIOT-GW/UL/+” to subscribe all the uplink data.
-
Page 7: Lte Setting
LTE setting ## Power-off and insert SIM card ## ## Power-on and Enable LTE function via Admin GUI ##... - Page 8 After login, go to WAN setting to enable LTE (input PIN code if needed) and press “SAVE”...
-
Page 9: Firmware Update
## Unplug PoE Adapter’s “DATA IN” port to let device switch from ethernet to LTE By default, device use ethernet to connect to internet. Unless PoE Adapter’s “DATA IN” port is unplugged, device will switch to use LTE. Firmware Update Go to “Device Management”... -
Page 10: Installation Procedure
Installation procedure Please follow the below process and suggestion when install the device For POE input cable: please use cable type CL3, CL3P, CL3R, CL3X, marked “SUNLIGHT RESISTANT”, “SUN. RES.”, or "SR." and "water resistant" or “W”. For LAN cable: please use cable type as described in Article 800 of ANSI/NFPA 70, "National Electrical Code"... - Page 11 Step 4. Step 5.Install the device on a pole. Please follow below picture’s direction, when install the device.
- Page 12 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Page 13 Professional installation instruction Please be advised that due to the unique function supplied by this product, device is intended use with our interactive entertainment software and licensed third-party only. The product will be distributed through controlled distribution channel and installed by trained professional and will not be sold directly to the general public through retail store.
Need help?
Do you have a question about the WAPD-246ACN and is the answer not in the manual?
Questions and answers