Advertisement
For All Installation Types insert and
tighten two screws (D) into wall bracket (A).
For Wood Stud Walls use a stud finder to locate center
of stud. Drill two 1/8" (3 mm) dia.
holes to a minimum depth of 1.5" (64 mm). Attach wall
bracket (A) to center of wood stud using two screws (G).
WARNING
• Tighten wood screws so that wall plate is firmly
attached, but do not overtighten. Overtightening can
damage the screws, greatly reducing their holding
power.
• Never tighten in excess of 80 in • lb (9 N.M.).
• Make sure that mounting screws are anchored into the
center of the stud. The use of an "edge to edge" stud
finder is highly recommended.
Visit the Westinghouse Web Site at www.westinghousedigital.com
wood screw guide
2 of 6
A
G
ISSUED: 04-14-04 SHEET #: 095-9190-1
For customer service call 1-866-287-5555.
D
WOOD
STUD
WALL
A
Advertisement
