Advertisement
2.
Put the plastic top cover on the unit.
3.
Press the top cover at the outer edge of the sealing
strip, and ensure the sealing strip is under the plastic
top cover
Caution!
Press down the plastic top cover evenly at each corner
and ensure that when the top cover is in place, no
sealing strip is squeezed out.
4.
Fix the top cover with the screws
NOTICE: When reassembling the unit make sure that no cables are pinched and all lose parts (sealing material residues, etc.) are removed from the
system.
4445104298/ 2023-12-12/ Page 6 of 6
Advertisement
