Advertisement
# Ensure the output of the charger is the same voltage as the battery.
# If battery has caps to access the battery fluid, remove the caps and check the fluid level before connecting the power clamps. If necessary
top-up the battery with distilled water by referring to the battery manufacturer's instructions (Apply the personal safety precautions described
in part 1.2).
# If the charger receives a sharp knock or blow the unit must be checked by a qualified service agent before using.
# If the battery terminals are corroded or dirty clean them before attaching the power clamps.
# Keep children and unauthorised persons away from the working area.
$ DO NOT dis-assemble the charger for any reason. The charger must only be checked by qualified service personnel.
$ DO NOT try to charge a non-rechargeable battery.
$ DO NOT try to start engine when charger is connected to battery.
$ DO NOT try to charge battery if fluid is frozen.
! WARNING! To prevent the risk of sparking, short circuit and possible explosion DO NOT drop metal tools in the battery area, or allow them to touch
the battery terminals.
$ DO NOT allow power clamps to touch each other or to make contact with any metallic part of the vehicle.
$ DO NOT cross connect power leads from charger to battery. Ensure positive (+/RED) is to positive and negative (-/BLACK) is to negative.
$ DO NOT pull the cables or clamps from the battery terminals.
$ DO NOT use the charger outdoors, or in damp, or wet locations and DO NOT operate within the vicinity of flammable liquids or gases.
$ DO NOT use charger inside vehicle or inside engine compartment.
# Ensure there is effective ventilation to prevent a build-up of explosive gases, and do not cover or obstruct charger ventilation louvres.
$ DO NOT use the charger for a task for which it is not designed.
! WARNING! DO NOT simultaneously charge batteries of different capacities or discharge levels.
! WARNING! If a fuse blows, ensure it is replaced with an identical fuse type and rating. Use only Sealey genuine parts.
# When not in use, store the charger carefully in a safe, dry, childproof location.
2.
INTRODUCTION & SPECIFICATIONS
2.1.
Introduction
Compact electronic battery chargers with pressed steel casing and carrying handle. Intelligent charge control makes them perfect for long term
maintenance of batteries on irregularly or seasonally used vehicles. AUTOCHARGE12 and AUTOCHARGE18 additionally feature an
analogue ammeter for accurate indication of charge rate. Suitable for lead-acid or low maintenance batteries, these chargers react continuously
to battery condition and deliver whatever charge rate is required. An LED display confirms the status of charger. These electronic chargers can
be connected to a battery for an indefinite period – the intelligent circuitry constantly monitoring the voltage and maintaining the battery's level of
charge at its optimum.
2.2.
Specifications
Model
AUTOCHARGE6.V3
AUTOCHARGE12.V3
AUTOCHARGE18.V2
Input
Voltage
Frequency
Voltage
230V AC
50Hz
12V DC
230V AC
50Hz
12V DC
230V AC
50Hz
12V DC
Output
Current
RMS
DC
6A
4A
12A
8A
18A
12A
AUTOCHARGE6.V3, AUTOCHARGE12.V3, AUTOCHARGE18.V2 - 2 - 100806
Recommended Battery Capacity
32 - 60Ah
45 - 180Ah
92 - 250Ah
Advertisement
