Package Contents 1 x Kettle Lid 1 x Electric Gooseneck Kettle 1 x Power Base 1 x User Manual Specifications Rated Power: 1200W Power Supply: AC 120V, 60Hz Capacity: 1.05qt / 1.0L Temperature Range: 104 - 212°F / 40 - 100°C Weight: 2.43 lb / 1.1kg Dimensions: 11.6 x 7.
Do not cover the spout or the openings on the lid while the kettle is in use. 13. To disconnect, use the On/Off Switch o turn the kettle off, then remove the plug from the wall outlet. SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY Fabuletta.com...
2. When pouring hot water, tilt the kettle slowly to control the flow of pouring. Pouring too quickly could result in water coming out of the lid and cause scald occurred. 3. Pour all hot water from the kettle before opening the lid to refill. Figuer 1 Fabuletta.com...
[See Page 8, Manually Setting Brewing Temperature] F. LED Display • Display the current water temperature and temperature unit G. Hold Icon • Display on while Hold Mode was selected H. Heating Icon • Display on while the kettle start heating Fabuletta.com...
• The kettle will automatically turn off once it has finished boiling the water. Allow it to cool, then pour out the water. Rinse thoroughly 2–3 times with cold water. • Do not drink the water that is boiled during this test. Figuer 2 Figuer 3 Fabuletta.com...
There are 2 recommended temperature presets for optimal brewing of Pour Over (205°F) and French Press ( 200°F) . [ See Figure 5 ]. 160°F 175°F 185°F 195°F 205°F COFFEE 212°F COFFEE 200°F HOLD HOLD HEAT HEAT Figuer 4 Figuer 5 Fabuletta.com...
Page 9
If you put the kettle back within 60 seconds, it will resume working. After 60 seconds, the kettle will turn off. • If the kettle is heating without water in it, a boil-dry protection device will automatically turn it OFF. [ See boil-dry protection explanation. ] Fabuletta.com...
• Once the display stops flashing the temperature is set and the kettle will start heating up to the set point. • The custom temperature range for Tea Button is from 104°F to 212°F, and for Coffee Button is from 190°F to 205°F. COFFEE Fabuletta.com...
If an error code “E1” is appeared on the display and all buttons blink and the kettle beeps. Please take the kettle off the base. Allow the kettle to cool and add more water before using again. Fabuletta.com...
The temperature reading on the kettle is preset to Fahrenheit but can be converted to Celsius. Simultaneously press and hold the increase icon and decrease icon for 3 seconds to [ See Figure 8 ] convert “°F” to “°C”. Figuer 8 Fabuletta.com...
Press and Hold the On/off button [ See Figure 9 ] bOFF appear on the display . The Icon b-ON means the beeps is [ See Figure 10 ] on and the icon bOFF means the beeps was turned off. Figuer 9 Figuer 10 Fabuletta.com...
3. Leave to soak for at least 30 minutes. Boil the mixture. 4. Pour out the mixture, then wipe off any remaining scale with a non-abrasive cloth, sponge, or cleaning brush. 5. Repeat as needed. 6. Empty Kettle and rinse with fresh water. Let dry thoroughly. Fabuletta.com...
“E1” code appears on Please take the kettle away the base and allow it to the display cool down to reset “E2” code appears on The kettle has the temperature sensor problem. the display Please contact Fabuletta Service Team. Fabuletta.com...
What Is Not Covered Under your Fabuletta guarantee, Fabuletta shall not be liable for costs of repair or replacement of a product incurred as a result of: Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation or handling of the Fabuletta appliance which is not in accordance with this Fabuletta Operating Manual.
If you have any questions about our products, please contact our customer support team. support.us@fabuletta.com www.Fabuletta.com * Please have your invoice and order ID ready before contacting Customer Support. Thanks for your purchase! Hope you will love it as much as we do. Start your fabulous life with Fabuletta Fabuletta.com...