Charging - Philips S3552 Manual

10
English
Replacement reminder

Charging

Charging with the power cord
For maximum shaving performance, replace the
shaving heads every year. The product is equipped
with a replacement reminder, which will light up
orange continuously as a reminder to replace the
shaving heads.
Note: After replacing the shaving heads, you need
to reset the replacement reminder by pressing the
on/off button for 5 seconds.
- Charging, recharging, or using the product at
temperatures below 40°F (4.5°C) or higher than
95°F (35°C) adversely affects the lifespan of the
battery.
- The power plug transforms 100-240V AC to less
than 24V DC.
Charge the shaver before you use it for the first
time and when the display indicates that the
battery is almost empty.
Charging takes approx. 1 hour. A fully charged
shaver has a shaving time of up to 60 minutes.
Note: You cannot use the shaver while it is
charging.
Note: Depending on your shaving/styling behavior
and beard type, the operating time may vary over
time.
1 Make sure the product is switched off.
2 Put the small plug in the product and connect
the power plug into any 100V to 240V AC outlet.
Use only the power cord provided.
- The display on the product will indicate the
product is charging.