Western Digital WDXUB3200JB Install Manual

1

Getting Started

Kit Contents
WD Dual-option External USB 2.0* Hard Drive
™
6 ft. (1.8m) USB 2.0 certified cable
Installation CD with Dantz
®
and detailed user manuals in portable document format (PDF)
AC adapter and power cord
Quick Install Guide
Two stands for vertical placement
Four feet for horizontal placement
*USB 2.0 host is required for Hi-Speed USB 2.0 performance. USB 2.0 is highly
recommended because of the significant reduction in file transfer time compared
to USB 1.1.

System Requirements

Windows
®
Available USB port
Windows 98SE/Me/2000/XP
Note: For highest performance and reliability, WD recommends that you install the latest service pack (SP) and updates. Windows users, go to the
Start menu and select Windows Update. Mac users, go to the Apple menu and select Software Update.
2

Setting Up

Note: For more detailed instructions, refer to the user manual on the installation CD or obtain it from support.wdc.com.
Windows 98SE/Me/2000/XP
1. Insert the installation CD into your CD-ROM drive. The program autoruns and launches
a setup menu. Select Install Retrospect Express for WD (Figure 2). In the next window,
click Next.
2. The license agreement window is displayed. To proceed, select I accept the terms in the license
agreement and click Next.
3. Enter your User Name and click Next. In the next window, select the Recommended
installation option and click Next.
4. In the next window, click Install to begin installation. After installation, click Finish.
Note: If you are running Windows 98SE/Me/2000 and operating system service packs or
updates were not installed, you must install them now and restart the computer before
proceeding.
5. To register the software, launch the backup software from the Start menu
(Start > Program Files > Retrospect > Retrospect 6.5).
6. Proceed to Section 3 to connect the drive.
Note: Depending on your system configuration, your computer may attempt to boot from your
WD Dual-option drive. Refer to your system's motherboard BIOS setting documentation to
disable this feature or visit support.wdc.com, click Knowledge Base, and search for answer ID 1201.
For more information about booting from external drives, refer to your system documentation or
contact your system manufacturer.
Retrospect Express backup software
®
Macintosh
Quick Install Guide
WD Dual-option
FEET
STANDS
®
Available USB port
Mac OS v9.2.2 or Mac OS X v10.2.8+
®
– 1 –
External USB Hard Drive
TM
Figure 1
WD
View WD Dual-option Quick Install Guide
View WD Dual-option User Manual
Figure 2
POWER CORD
AC ADAPTER
AC ADAPTER CORD
USB 2.0 CABLE