Table of Contents
Advertisement
. Changes can be made at any time by
pressing the Clean or Stop Time
button and turning the Set knob to
the new desired clean or stop time.
crm
LILIES
cream tock |
STOP
TE
. When the Self-Clean cycle starts, the
stop time will show in the large
display. The STOP TIME, CLEAN,
LOCK and ON lights will come on.
the Lock Lever must not be moved
and the door cannot be opened after
normal baking temperatures are
exceeded.
. After the Self-Clean cycle is
completed, the large display will
show the time of day.
. When the oven reaches normal
baking temperatures, the Lock Latch
can be moved to the left and the
oven door opened. Do not force it.
Wait until it will move easily.
. After the oven is cool, wipe off any
residue or ash with a damp cloth. If
needed, touch up spots with a soapy
steel wool pad.
STOPPING THE SELF-CLEAN
CYCLE AT ANY TIME
1. Push the Cancel button.
2. When the oven cools to below
normal operating temperatures,
move the Lock Lever back to the left.
Do not force it. Wait until it moves
easily.
SELF-CLEANING OVEN TIPS
© Evening is a good time to clean oven,
after normal oven use is completed.
© Small amounts of smoke escaping from
the oven vent are normal when oven
is heavily soiled. Excessive smoke may
indicate heavy spillovers have not
been wiped up.
è Do not force the Oven Lock Lever
open when the Lock Indicator Light is
on. Damage to the lock mechanism
may result.
e Clean the oven regularly, before it
becomes "excessively dirty." If oven is
not clean after one cycle, repeat the
Self-Clean cycle.
e After a Self-Clean cycle, any powdery
residue can be wiped away with a
damp cloth. If white spots remain in
the oven after a Self-Clean cycle,
remove them with a non-scratch
scouring pad before using the oven
again. These spots are usually salt
residues that cannot be removed
during the Self-Clean cycle.
© If the soil removal was not complete,
increase the length of the clean time in
the next cycle.
Advertisement
Table of Contents
