Related Manuals for TECPEL DTM-320
Summary of Contents for TECPEL DTM-320
- Page 1 Machine Translated by Google https://tecpel.com DTM-320/DTM-321/DTM-322 Ambient temperature and humidity meter/recorder...
-
Page 2: Operation
Machine Translated by Google https://tecpel.com introduction specification Symbol & key button location Operation Power on/ off Memory capacity Thermocouple connection Temp. Unit choice Hold reading value Time features Time counting Relative reading function Memory function Time setting 4.10 Record Time interval 4.11... - Page 3 DTM-320/DTM-321/ DTM-322 is a handheld instrument with temperature and humidity measurement functions. DTM-321 / DTM-322 tool It has "K" type thermocouple temperature rod measurement function. TECPEL DTM-322 also has a memory device (Datalogger), which can connect up to Continuously memorizes 16,000 entries (Note 1). You can directly record the temperature and humidity values in the meter without connecting to the computer, and then transfer the memorized data via the computer.
- Page 4 Accessories: instruction manual, 9V battery, leather case, "K" type wire temperature cable (DTM-321 / DTM-322 ), Windows operating software (DTM-322 ), USB transmission cable (DTM-322 ) Optional accessories: AC/DC power converter, RS-232 computer cable 3. Symbol definition and key position DTM-320 TIMER HOLD 9V BATTERY...
- Page 5 Machine Translated by Google https://tecpel.com Instructions for use DTM-321/322 DTM-321 DTM-322 T2 ( ) K-TYPE T2 (K-TYPE) SETUP HOLD TIME HOLD 9V BATTERY NEDA 1604 6F22 00 CLOCK INTV PLEASE READ MANUAL FOR SAFE TEMP: 20C TEMP: F140 (200 1370...
- Page 6 4.8 Relative reading function (return to zero): ( DTM-320 model ) When the "REL" key is pressed , the temperature and humidity meter will record the current reading and display the difference between the current reading and the memory reading. Press again to deactivate this function.
- Page 7 Machine Translated by Google https://tecpel.com Instructions for use 4.10 Time setting: ( DTM-322 model ) (figure 1) Step 1: Press and hold the "MAX MIN" button and then turn on the phone to enter the setting mode. (Picture 1) Step 2: Press the "CLOCK" button ("TIME") to enter the time setting mode (Figure 2) Step 3: Press "REC"...
-
Page 8: Digital Output
Machine Translated by Google https://tecpel.com Instructions for use 4.15 Digital output: Output method: UART 9600bps N, 8, 1 normal High. Output format: ASIC II character output and encoding status flag report Signal output connection: please refer to the picture on the right Warning ! 1. - Page 9 Instructions for use 5. Software installation instructions: ( TECPEL DTM-322) Install the TestLink (Humidity DataLogger) software; the attached CD is the TestLink SE-310 program. Please install it on your computer and connect the computer cable to the temperature and humidity meter and the computer.
- Page 10 Machine Translated by Google https://tecpel.com Instructions for use 5-3. DataLogger ( only applicable to DTM-322) Select "DataLogger" on the main menu, and TestLink will load the memory data on the temperature and humidity meter into the computer, and will display the loading progress.