Biostar P4TPE Pro Manual page 46

P4TPE Pro BIOS Setup
On-Chip PCI Device
AC97 Audio/ Modem
This item allows you to decide to enable/ disable to support AC97 Audio/Modem.
The Choices: Auto (default), Disabled.
Onboard LAN Boot ROM
Decide whether to invoke the boot ROM of the onboard LAN chip.
The Choices: Disabled, Enabled (default).
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you
have USB peripherals.
The Choices: Enabled (default), Disabled.
USB 2.0 Controller
This item allows you to Enable or Disable the USB 2.0 Controller.
The Choices: Enabled (default), Disabled.
USB Keyboard Support
The default value is Disabled.
Enabled
Disabled (default)
Init Display First
This item allows you to decide to active whether PCI Slot or on-chip VGA first.
The Choices: AGP (default), PCI Slot.
Onboard I/O Chip Setup
POWER ON Function
This item allows you to Power on the system by Keybord and Mouse .
The Choices: Password , Hot KEY , Mouse Move , Mouse Click , Any KEY , BUTTON
ONLY, Keyboard 98, Disabled (default).
KB Power on Password
Input password and press Enter to set the Keyboard power on password .
HOT Key power ON
Input password and press Enter to set the Keyboard power on password .
The Choices: Ctrl-F1(default) , Ctrl-F2, Ctrl-F3, Ctrl-F4, Ctrl-F5, Ctrl-F6, Ctrl-F7,
Ctrl-F8, Ctrl-F9, Ctrl-F10, Ctrl-F11, Ctrl-F12 .
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) installed on the system
Enable USB Keyboard Support.
Disable USB Keyboard Support.
16