Advertisement
Names of parts and their functions (Fig. 1)
Head (titanium material)
Attach cotton and apply it to the skin.
The device vibrate while it is being used.
Mode indicator lamp (orange)
Turn the power switch "On," and
"CLEANSING" will start flashing. Then, it
switches and lights up while the device
is being used.
Mode switch button
Every time the button is pressed, the
mode for use will be switched.
Power switch (" ")
Turn on the power switch, and it will turn
"On." Press it again, and it will turn "Off."
An automatic shutoff function is equipped,
so if the device is not used around 5
minutes, it will automatically turn "Off."
Body
Body socket
Level indicator lamp
LOW (green): MEDIUM (green): HIGH (red)
When the power switch is switched to
"On," the lamp indicating "HIGH,"
"MEDIUM," or "LOW" is turned on.
Preparation before use
How to charge
●
Since this is not fully initially charged, charge before first using.
●
Make sure to use only 100-240V and use the included power adaptor.
Do not insert and remove the power plug from an electric outlet with
wet hands. (Cause of electric shocks and short-circuits)
Do not use in places splashed with water, such as in a bath,
or in damp places. (Cause of failures or short-circuits)
1. Turn off the switch, and connect the power adaptor to the main body and electric outlet.
Charge indicator lamp
(Fig. 2)
During charge : The lamp turns on. (Red)
After charging is completed : The lamp turns off.
If the plug for the device's power adaptor is pushed in with force, or unnecessarily
tilted, the main body socket may be broken.
2. After the standard charging time (5 hours) has elapsed, pull out the power adaptor from
the electric outlet and the main body. (Fig. 3)
●
The main body and the power adaptor become slightly hot, however, this is not
unusual.
Get other manuals https://www.bkmanuals.com
Level switch button
Every time the button is pressed, "the
strength" of the electrical potential will
change. There will be no change in
vibration strength.
Charge indicator lamp
During charge : The lamp turns on. (Red)
After charging is completed : The lamp
turns off.
Buzzer (Switching sound/warning
sound/finish sound)
Every time the switch or button is pressed,
the switching sound will beep. If the
warning sound beeps while the device is
being used, this is an indication to
recharge your batteries. When each mode
is finished, the finish sound will beep.
Back plate (titanium material)
Batteries (built-in)
Nickel hydride battery: 2
Power adaptor
Model: KH-182B
Power plug
Cord
Rings (two)
Rings for attaching cotton.
Stand
-4-
Instrument plug
Accessories
Advertisement
