Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CTI Wingman F1
Summary of Contents for CTI Wingman F1
- Page 1 PORTABLE GAS DETECTOR Operation Manual...
- Page 2 Warning Use this product only in the manner described in this manual. If the gas detector is used in a manner not specified by CTI, the protection provided by the gas detector may be impaired. To ensure your personal safety, read the Safety Information section before operating the gas detector.
-
Page 3: Table Of Contents
WINGMAN Table of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 General Description . -
Page 4: Safety Information
WINGMAN Safety Information General Description The WINGMAN F1 portable gas detector is designed to protect personnel against amomonia gas • This is a gas detector, not an concentrations independent of fixed analytical measuring device. detection systems. • Don't use the detector if it is The large, lighted, LCD display shows damaged. -
Page 5: External Features
WINGMAN External Features External Features ① ④ Item Function Visual alarm ② LCD display Pushbuttons ③ Alligator clip Audible Alarm Gas Inlet ⑤ ⑥... -
Page 6: Display Elements
WINGMAN Display Elements Item Function Battery status Gas concentration value Alarm conditions Silence alarms / HIGH Calibration due* STEL CAL DUE Target gas Parts per million *During an alarm condition, this section of the display will show Silence. During normal operation, this section of the display will show Cal Due if the time since last calibration is ≥... -
Page 7: Pushbuttons
WINGMAN Pushbuttons Power Up Power Up: Hold for 1 second Power Down Power Down: Hold for 3 seconds Return Home Return Home: Tap ✅ Select Options will change depending on which menu is Next active. Silence Press △ 1 time for Peak/TWA/STEL △... -
Page 8: Powering On The Detector
Once the self-test starts, it performs the following checks. Confirm that all actions occur. The screen will activate with "CTi" displayed SHUTTING All pixels of the display are turned on. DOWN Visual, audio, and vibrating alarms are activated. -
Page 9: Menu Tree
WINGMAN Menu Tree... -
Page 10: User Options
WINGMAN User Options Calibration To enter the User Options menu Note: Before beginning calibration screens from the Home screen, press please ensure you have: Certified and hold the Calibration Gas, Zero Gas (optional), △ + ✅ keys for 1 second. Cal Cup, and Tubing attached to cup. - Page 11 WINGMAN Zero Calibration Span Calibration The current PPM value is displayed. If a The concentration of the Certified zero calibration is necessary, follow the Calibration Gas should be between ✅ next steps. Otherwise, press the 10% and 100% of the full-scale range to go to Span calibration.
-
Page 12: Set Alarms
WINGMAN Set Alarms CAL DONE ZERO -0.5% ALARMS SPAN 39.2% NEXT ▲ ▼ ENTER Note: If an extreme gain adjustment Once in the Set Alarms data screens, was applied, the sensor may be at or △ / ▽ press the keys to change the near the end of its useful life. -
Page 13: Set Clock
WINGMAN Set Clock Set the Time △ / ▽ Use the keys to set the Time ✅ (24-hour format). Use the key to advance through the screens. CLOCK SET TIME SET TIME ▲ HOURS MINUTES ▼ ENTER Set the Date ▲... -
Page 14: Event Log
Use the keys from home screen to scroll through the various read only information screens. These screens ▲ contain what the WINGMAN F1's ▼ ENTER current settings are, periodic review is recommended to ensure changes have Once in the Event Log data screen, use △... -
Page 15: Responding To An Alarm
WINGMAN Responding to an Alarm Alarm modes: Low Alarm: • Slow flash • Slow beep • Low alarm flashes • Slow vibration HIGH HIGH High Alarm: STEL STEL • Fast alternating flash SILENCE SILENCE • Fast beep • High alarm flashes Alarm: During an alarm condition, •... -
Page 16: Maintenance
• Regular cleaning of the detector should only be done with a damp, soft cloth. Do not use The WINGMAN F1 portable gas solvents or chemicals. detector is designed for long life with •... -
Page 17: Sensor Replacement
Turn off the detector before from CTI. proceeding. Electrochemical cells are extremely Use a small #1 Phillips head screwdriver to reliable, but several things can cause remove the (4) screws from the back of the detector and carefully open the case. -
Page 18: Battery Replacement
WINGMAN Battery Replacement Note: Ensure the sensor filter and audible alarm gasket are properly seated into the top half of detector housing. When the battery is removed from the Turn off the detector before detector, the clock will revert back to its proceeding. -
Page 19: Troubleshooting
No battery. Install battery. Dead battery. Replace battery. Reversed battery. Install battery correctly. Defective detector. Contact CTI. Displays more than Sensor still stabilizing. For new sensor element, allow 5 minutes 0 ppm in clean air. Need to re-zero. to stabilize. -
Page 20: Replacement Parts
Calibration Kit with valve, regulator, gauge for 34L RB34L-NH3/100 Certified Calibration Gas 100 ppm 34L Cylinder CK-CUP & HOSE-0 Cal gas cup and hose assembly Contact CTI to order: 920 N. Tradewinds Pkwy Columbia, MO 65201 phone: 866-394-5861 email: sales@ctigas.com... - Page 21 WINGMAN Replacement Parts (exploded view) F1-CLIP SEF-NH3-EC F1-BZRG (Replacement NH3 Sensor) F1-BATT F1-SCREW F1-FILTER...
-
Page 22: Specifications
WINGMAN Specifications: Detection Principle: Electrochemical Zero Drift: Less than 0.1% of full-scale Sampling Method: Diffusion per month, non-cumulative. Gases: Ammonia (NH3) Span Drift: Application dependent, but Range: 0-500 ppm generally less than 3% per month. Linearity: +/- 2% of full-scale. Display: LCD, HR TFT, 2.7"... -
Page 23: Warranty
No goods shall of shipment to the buyer. This warranty be returned to CTI until receipt by the buyer of extends only to the sale of new and unused shipping instructions from CTI; and products to the original buyer. - Page 24 CT49-DOC1-0 ctigas.com | 866-394-5861 Software version 3.0.0 20230918...
Need help?
Do you have a question about the Wingman F1 and is the answer not in the manual?
Questions and answers