1. Manuals
  2. Brands
  3. Unimig Manuals
  4. Motorcycle Accessories
  5. Core Series
  6. Operating manual

Unimig Core Series Operating Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operating Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Core Series and is the answer not in the manual?

Questions and answers

Related Manuals for Unimig Core Series

Summary of Contents for Unimig Core Series

  • Page 1 Operating Manual...

  • Page 2: Table Of Contents

    CORE SERIES WELDING HELMET OPERATING MANUAL Core Series Core Series Welding Helmet - Black Welding Helmet - Revenant U21031 U21032 Contents 1. Safety 2. Features 3. Specifications 4. Parts Breakdown 5. Operating Instructions 6. Harness Operating Instructions 7. Troubleshooting 8. Warranty 9. Shade Guide...

  • Page 3: Safety

    CORE SERIES WELDING HELMET OPERATING MANUAL 1. Safety Please read and understand all instructions before using. • Be sure that the dark shade of the lens in the welding helmet is on the correct shade number for your application. • The helmet and lenses are not suitable for “overhead” welding application, laser welding, or laser cutting applications.

  • Page 4: Features

    CORE SERIES WELDING HELMET OPERATING MANUAL 2. Features 98x48mm View Size Get clear visibility in every situation. The 98x48mm viewing area lets you see every weld with complete clarity. External Grind Button Seamlessly switch to grind mode with the click of a button. When the helmet is in grind mode a small LED will illuminate, so you don’t need to take the helmet off to check.

  • Page 5: Specifications

    Yes (External) Minimum TIG Amperage AS/NZS 1337.1 B (High Impact) Standards AS/NZS 1338.1 (Auto-Darkening) 3.2 Replaceable Parts Part Core Series Welding Helmet Lens Kit U21037 4 Point Harness U21035 4 Point Harness Sweatband & Back Pad U21036 U21010 - 1.5x Magnification Lens Magnification Lens U21011 - 2.0x Magnification Lens...

  • Page 6: Parts Breakdown

    CORE SERIES WELDING HELMET OPERATING MANUAL 4. Parts Breakdown Helmet Shell 6. Inner Lens Cover (U21037) 2. Adjustment Knob 4 Point Harness Sweatband (U21036) 3. Outer Lens Cover (U21037) 8. 4 Point Harness (U21035) 4. ADF Frame 9. 4 Point Harness Back Pad (U21036)

  • Page 7: Operating Instructions

    Choose an optimum shade number for the required welding process or application. If this lens does not darken when striking an arc, stop welding immediately and check the helmet is in Weld Mode and not Grind Mode. If the issue persists, contact your local UNIMIG Service Department.
  • Page 8 CORE SERIES WELDING HELMET OPERATING MANUAL Sensitivity Control The responsiveness to different light levels in various welding processes can be adjusted in the range from low to high. Set the Sensitivity Dial (3) to your preferred level. Turn the dial counter-clockwise arrow-ro to decrease sensitivity, and rotate it clockwise arrow-ro to increase sensitivity.
  • Page 9 CORE SERIES WELDING HELMET OPERATING MANUAL Removing The ADF From The Helmet Shell Switch both ADF frame locks to the 2. Lift the bottom of the ADF up then slide up position to unlock it from the helmet the unit down to remove it from the shell.
  • Page 10 CORE SERIES WELDING HELMET OPERATING MANUAL Changing The Inner Lens Cover Pry the inner lens cover up from the finger groove at the top of the ADF. The inner lens cover can then slide up and out of the ADF.
  • Page 11 • The arc light must be visible completely by all arc sensors. If not, the ADF may struggle to detect an arc and may not activate the selected shade. • Please use the automatic filter at a temperature between -5°C-55°C. • Do not disassemble the filter. If any problems arise, please contact your local UNIMIG service department.

  • Page 12: Harness Operating Instructions

    CORE SERIES WELDING HELMET OPERATING MANUAL 6. Harness Operating Instructions 6.1 Neck Band Adjustment To tighten the neck band, turn the neck band adjustment dial rotate-r clockwise . To loosen the neck band, turn the neck band adjustment dial rotate-l anti-clockwise. 6.2 Head Strap Adjustment To adjust the head straps, first push the head strap lock out of the current position.
  • Page 13 CORE SERIES WELDING HELMET OPERATING MANUAL 6.3 Distance Adjustment To adjust the distance between your face and the lens, push the distance adjuster buttons. The helmet shell can now move towards or away from your face. Release the buttons to lock the shell into position.

  • Page 14: Troubleshooting

    8. Warranty UNIMIG auto-darkening welding helmets are covered for warranty for up to three years from the date of purchase from authorised UNIMIG dealers. The duration of use depends on various factors such as use, cleaning storage and maintenance. Frequent inspections...

  • Page 15: Shade Guide

    CORE SERIES WELDING HELMET OPERATING MANUAL 9. Shade Guide MMA/STICK Current Shade Current Shade <40A <20A 40-60A 20-40A 60-175A 40-100A 175-300A 100-175A 300-500A 175-250A >500A >250A Arc Gouging Current Shade Current Shade <100A <175A 100-175A 175-225A 175-300A 225-275A 300-500A 275-350A >500A 350-450A >450A...
  • Page 16 PH: (02) 9780 4200 PH: (07) 3333 2855 PH: (03) 8682 9911 PH: (08) 6363 5111 FAX: (02) 9780 4210 FAX: (07) 3274 5829 FAX: (03) 9333 7867 FAX: (08) 9417 4781 E: sales@unimig.com.au E: qld@unimig.com.au E: sales@unimig.com.au E: wasales@unimig.com.au...

This manual is also suitable for:

Core u21031Core u21032

Table of Contents