Page 2
7. Locking Knob 8. Telescopic Stand 9. Base 10. Fan Grill Securing Hole SPECIFICATION Model No: ............................KP1005 Voltage: ............................... 220-240 V ~ 50 Hz Wattage: .............................. 230W Rated Speed: ............................1300 - 1400/rpm Air Volume: ............................280 - 300 m /min Blade Type: ............................
Page 3
4 BLADE PEDESTAL FAN General Power Tools Safety Warnings Save all warnings and instructions for future reference. WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. 1) Electrical Safety a) Power lead plugs must match the outlet.
Page 4
4 BLADE PEDESTAL FAN 750mm 4 Blade Pedestal Fan Assembly Instruction KP1005 - 750mm 4 Blade Pedestal Fan Unpack all the components from the box. 1) Assembling The Base To The Telescopic Stand (fig 1a) (fig 1b) While holding the Base (9) on its side, insert the Telescopic Stand (8) into the Base (9) (fig 1a).
Page 5
Rear Safety Grill (2) that has already been secured to the fan motor (fig 5a). Lock the side and bottom clips in place (fig 5b). Note: The Kincrome logo should be level or horizontal. (fig 5a) (fig 5b) Secure the front & rear safety grills together using the fan grill securing hole in the bottom of the fan grill by inserting the fixing screw and nut provided (fig 5c).
Page 6
(other than defects caused by abnormal or non warranted use) you can, at your cost, send the product to place of purchase, an authorised Kincrome service agent or one of Kincromes addresses for repair or replacement.
Need help?
Do you have a question about the KP1005 and is the answer not in the manual?
Questions and answers