Related Manuals for UFO IP-04
Summary of Contents for UFO IP-04
- Page 1 PRODUCT USER GUIDE IP-04 Weatherproof Enclosure Rev: C1 PLEASE READ THIS USER GUIDE BEFORE INSTALLING OPERATING OR PERFORMING MAINTENANCE ON THE ENCLOSURE...
- Page 2 INTRODUCTION Thank you for purchasing this UFO weatherproof enclosure which is fitted with an LED light source unit. To ensure the enclosure is mounted and connected correctly please read this user guide before installing and operating or performing any maintenance on the enclosure. To ensure that the...
-
Page 3: Model Variations
Four IP-03 enclosure variants are shown in the examples on the followng pages. Figures 1 and 2 are schematics of the 48V light source version using a UFO Comet light source as an example. For DC supply voltages more than 12V a DC-to-DC converter is used to power the 12V DC fan. - Page 4 INTRODUCTION FIGURE 1 AC SCHEMATIC USING COMET LIGHT SOURCE 04 WEATHERPROOF ENCLOSURE USER GUIDE...
- Page 5 INTRODUCTION FIGURE 2 24 V DC SCHEMATIC USING COMET LIGHT SOURCE UFO LIGHTING...
- Page 6 INTRODUCTION FIGURE 3 AC SCHEMATIC USING QUASAR LIGHT SOURCE 04 WEATHERPROOF ENCLOSURE USER GUIDE...
- Page 7 INTRODUCTION DIMENSIONS Note that dimensions are shown in mm. UFO LIGHTING...
- Page 8 INTRODUCTION MODEL INFORMATION COMET PRODUCT CODES Ordering Code Control Options Power Variant Total Power UFO IP04COM50DMXAC Manual, DMX, 010V, 110V 240VAC 50Hz UFO IP04COM50DMXDC Manual, DMX, 010V, 110V 48V DC As above + Dali with UFO IP04COM50DMXDAC 240VAC 50Hz interface As above + Dali with UFO IP04COM50DMXDDC...
- Page 9 INTRODUCTION COMET PRODUCT CODES Ordering Code Control Options Power Variant Total Power UFO IP04QUACT180CAC Manual, DMX, 010V, 110V 240VAC 50Hz 150W UFO IP04QUACT290CAC Manual, DMX, 010V, 110V 240VAC 50Hz 150W UFO IP04QUACT180TAC Manual, DMX, 010V, 110V 240VAC 50Hz 150W UFO IP04QUACT290TAC Manual, DMX, 010V, 110V...
-
Page 10: Installation
300mm (12”) of space around all sides to allow for air circulation and to prevent overheating. Mounting the enclosure in any other way will invalidate the IP rating and the product warranty. UFO will accept no responsibility for any loss or damage that occurs due to incorrect mounting. 04 WEATHERPROOF ENCLOSURE USER GUIDE... - Page 11 3. Choose appropriate fixings for the surface that the enclosure is being mounted to. Note that unless UFO are installing the unit then we do not supply fixings. This is due to the large variance of surface types the enclosure may be mounted to.
- Page 12 INSTALLATION FOR DIRECT MAINS OPERATION ( AC SUFFIX MODELS ) CONNECTION There may up to three connections required via the appropriate gland: 1. The fibre harness. 2. The DMX or 0-10V cables for any light sources with that control functionality 3.
- Page 13 (AC version) or the remote PSU (DC version). If no light is produced consult the TROUBLESHOOTING section in this manual and the light source manual. UFO LIGHTING...
-
Page 14: Troubleshooting Guide
Check fuse/trip & replace/reset if necessary. If Blown fuse or circuit tripped PSU is out problem persists, isolate mains and contact UFO AC & DC enclosure Refer to Troubleshooting section in Light source not connected correctly model. Unit is dead light source user guide –... -
Page 15: Maintenance
* Note that the IP protection category only applies when the enclosure is mounted as specified by UFO - see page 2 for details. Mounting the enclosure in any other way invalidates the IP rating and the product warranty. UFO will accept no responsibility for any loss or damage that occurs due to incorrect mounting. - Page 16 United Kingdom • United States • Germany • Europe • Universal Fibre Optics Ltd Universal Fiber Optics USA LLC UFO Licht GmbH Home Place Coldstream 1749 Northgate Blvd Andreasstraße 20 TD12 4DT Sarasota FL34234 93059 Regensburg Deutschland +44 (0)1890 883416...
Need help?
Do you have a question about the IP-04 and is the answer not in the manual?
Questions and answers