Step 11; Wiring Connections - Samsung DW80H995 Series Installation Manual

STEP 11
t.
2.
WIRING CONNECTIONS
Before connecting the power cable to the dishwasher, make sure the circuit breaker is off.
In the junction box located at the front bottom right of the dishwasher, find the three power
wires from the dishwasher including the grounding line.
3. Pass the power cable through the strain relief, and then into the junction box (Figure 13).
4. Connect the black wire of the dishwasher to the black wire of the power cable by insertng
both into a wire nut. and then rotating the wire connector as shown in Figure 14.
Connect the white wire to the white wire and the green to the green in the same manner.
5. Recheck each wire to ensure it is connected correctly and securely.
Each colored wire should be connected to the corresponding wire of the same color.
White should be connected to white, black to black, and green to green.
6. Replace the junction box cover on the dishwasher.
<Figure t3>
Power cable L
Junction box
Strain relief
Black to black
t White to white
| Green to green
(Ground to ground)
<Figure t4>
20 installing the dishwasher
D1,*Tg0H9950US 00151A 06 EN 150216illdd See3:20