Subscribe to Our Youtube Channel
Related Manuals for CTC Union INJ-IG02-PH
Summary of Contents for CTC Union INJ-IG02-PH
- Page 1 Quick Installation Guide INJ-IG02-PH INJ-IG02-PHE Industrial Grade Gigabit Ethernet PoE Injector sales@ctcu.com...
- Page 2 8F, No. 60 Zhouzi St., Neihu, Taipei 114, Taiwan T +886-2-26591021 F +886-2-26590237 E sales@ctcu.com H www.ctcu.com 2020 CTC Union Technologies Co., LTD. All trademarks are the property of their respective owners. Technical information in this document is subject to change without notice.
- Page 3 CTC Union Technologies makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does CTC Union assume any liability arising out of the application or use of any product and specifically disclaims any and all liability, including without limitation any consequential or incidental damages.
-
Page 4: Table Of Contents
Table of Contents Introduction .................. 5 Package List ................. 5 Features ..................5 Specifications ................6 .................... 6 THERNET NTERFACE ......................6 OWER ...................... 6 ECHANICAL ....................6 NVIRONMENTAL ....................7 ERTIFICATIONS MTBF (MIL-HDBK-217) ..................7 Panels ................... 8 Connectors ................... 9 RJ-45 E ................ -
Page 5: Introduction
PoE (Power over Ethernet) injector that can pass electrical power safely, along with data, on Ethernet cabling. Unlike standard PoE compliant devices, INJ-IG02-PH(E) can feed PoE power when the device is powered up and provide up to 60W through non-standard use of all 4 pairs of category 5 cable. -
Page 6: Specifications
• Dimensions: 70 mm (D) x 30 mm (W) x 103 mm (H) • Mounting: DIN-Rail, Wall Mount (Optional) • Weight: 210 g Environmental • Operating Temperature: -10°C~60°C (INJ-IG02-PH); -40°C~75°C (INJ- IG02-PHE) • Storage Temperature: -40°C~85°C • Humidity: 5%~95% (Non-condensing) -
Page 7: Certifications
Certifications • EMC: CE • EMI (Electromagnetic Interference): FCC Part 15 Subpart B Class A, CE • Railway Traffic: EN50121-4 • Immunity for Heavy Industrial Environment: EN61000-6-2 • Emission for Heavy Industrial Environment: EN61000-6-4 • EMS (Electromagnetic Susceptibility) Protection Level: ➢... -
Page 8: Panels
Panels Figure 2. Top Panel Figure 1. Front Panel Description Gigabit Ethernet LAN port Gigabit Ethernet & PoE LAN port LED indicators Terminal block Grounding connection Grounding sign... -
Page 9: Connectors
Connectors INJ-IG02-PH(E) has two standard shielded RJ-45 connectors for Ethernet cable connections. The connector labeled GbE (Data input) will connect to Ethernet switch, while the connector labeled GbE+PoE (Data + PoE output) will connect to PoE PD device such as IP Camera, Access Point, IP Phone, Digital Signage or any other PoE power device. -
Page 10: Power Connection
Power Connection Figure 4. Terminal Block INJ-IG02-PH(E) is powered up by an external power supply (44VDC~57VDC). To connect to the power supply, insert V+ and V- wire into power contacts. Then, tighten the wire-clamp screws to prevent power wires from loosening. If the power supply is connected correctly, then the PWR LED on the front panel will light in green. -
Page 11: Installation
This spring is compressed for mounting and un- mounting by applying downward force. Figure 7. Mounting Figure 8. Un-mounting Application Up to 330 feet or 100 meters Data + 30W or 60W PoE Data PoE PD Device Non-PoE INJ-IG02-PH(E) Ethernet Switches Figure 9. Injector Application... - Page 12 Version Date Description 2020/10/30 Use new document format...
Need help?
Do you have a question about the INJ-IG02-PH and is the answer not in the manual?
Questions and answers