Grainger 55GU71B Operating Instructions And Parts Manual

Operating Instructions and Parts Manual
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect your-
self and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could
result in personal injury and/or damage to product or property. Please retain instructions for future reference.
Description
The oil control gun is used for dispensing automotive lubricants.
The oil control gun is balanced and light weight for reducing operator
fatigue. The grip is shaped to fit the hand comfortably. It is equipped
with a four-finger trigger. This model has an auto tip.
Specifications
Products Series
Inlet Connection
Fluid Range
Pressure Range
Temperature
Viscosity
Spout
General Safety Information
WARNING:
Read the safety warnings and instructions
in this manual carefully, before installation and use of the
oil control gun. It is the responsibility of the purchaser to retain
this manual for future reference. Failure to comply with the
recommendations stated in this manual may damage the oil
control gun and void factory warranty. Wear ear and eye
protection. Before doing any maintenance on the oil control gun,
be certain all pressure is completely vented from the pump,
suction, discharge, piping, and all other openings and connec-
tions. Be certain the air supply is closed or shut down, so that it
cannot be started while work is being done on the oil control
gun. Be certain that approved eye protection and protective
clothing are worn at all times in the vicinity of the oil control gun.
Failure to follow these recommendations may result in serious
injury or death.
DANGER:
NEVER use with fluids that have a flash
point below 100ºF (38ºC). Examples: gasoline, alcohol.
Sparking could result that will cause serious personal injury,
death, or major property damage.
IMC100 55GU71B
Printed in China
with Flex Extension
55GU71B
1/2"NPT Female
1-35L/min / 0.3-9.25gpm
70-1450psi
Max. 60°C / Max. 140ºF
8-5000mPas
Flexible, Auto tip
CAUTION:
no circumstances should the oil control gun be aimed at
any person. Personal injury may be caused.
Operating Instructions
1. Connect the control handle to the lubricant supply line (1/2"
NPT male thread required).
2. Squeeze oil control gun trigger. When the required amount of
product has been dispensed, release the trigger to stop
delivery.
05/2023
Version 0
55GU71B
Oil Control Gun
Maximum fluid pressure 1450 PSI. Under