Advertisement
D Programmer pushbutton ©
By pressing this pushbutton the 23
numbers that mark the various wash
cycles appear in sequence in the display
window. (see programme chart on
page 16-20).
If the button is pressed during the wash
cycle the display shows the number and
characteristics of the cycle in progress.
When released the remaining time before
the cycle is completed is displayed.
E Cycle display
The liquid crystal display shows the
following information:
The 23 numbers which identify the cycle
appear in the window in sequence when
the Programmer Pushbutton is pressed.
During the selection of the cycle, beside
the number which identifies the cycle,
other characters will appear when the
following buttons are pressed:
Prewash LU
Half load W3
Spin Speed 650
Once the Start Button has been pressed,
the time which it will take for the
programme to be completed is shown in
the window.
The time is being constantly reassessed
according to the water temperature and
washing conditions, and will update at
regular intervals. Please note that the
readout for the quickwash programme
does not update itself as frequently as the
rest of the programmes.
A key symbol is shown to indicate that the
washing machine door is locked. At the
end of the cycle the display shows zero.
After 1 - 2 minutes the key symbol m0
starts to flash to indicate that the door
can be opened.
Always remember to drain the water
before opening the door.
13
Advertisement
