How To Use; Charging The Device; Led Charging Indicator - BlueTees 3 MAX+ User Manual

1. Fully charge the rangefinder, using the USB-C cable included, for minimum 2 hours before
use of product.
2. Look through the eyepiece and turn the focus dial clockwise or counter clockwise until the
image is sharp.
3. Press the power button to turn on your Series 3 Max+. The display will turn off automatically
when not in use.
4. Press the MODE button to select the Mode you need.
[SCAN] for continuous measuring
[GOLF] for golfing
5. Press and hold the MODE button for 2-3 seconds to change the measure unit from Meters to
Yards. (M/Y)
6. Aim the target through the cross on the display. Press and hold the start button to get a
continuous reading as you move the rangefinder to scan the course.
[Applicable to SCAN mode]
7. Aim the target through the cross on the display. Press the start button once aligned with your
target.
[Applicable to GOLF mode]
8. Press the RED / BLACK CONTROL button to switch between color modes

CHARGING THE DEVICE

This device is powered by a non-removable, built-in lithium-ion battery that can be charged using
any standard USB port on your laptop/computer or an AC adapter.
WARNING: This product uses a Lithium based battery. Lithium batteries can overheat and
cause damage if physically abused. Do not use batteries that are damaged or show signs of
physical wear.
Note: This device will not charge/operate outside of the approved temperature range (page X)
1. Insert the small end (USB-C) of the provided charging cable into the USB-C charging port on
the device.
2. Insert the large end (USB-A) of the provided charging cable into an external power source,
such as a USB port on your laptop/computer or an AC adapter.
3. Remain inserted until device is fully charged.
LED CHARGING INDICATION
Solid Red
Solid White

HOW TO USE

STATUS
The battery is below 10% or charging
The device battery is fully charged
ENGLISH 5