Sony WEGA KLV-32M1 Operating Instructions Manual page 42

I
Press POWER on the remote control.
POWER
Watching the TV
MUTING
2
Tip
When the (_) (Power on Stand by) LED goes off, press (_)
(Power) on the TV.
Select the desired channel using the 0-9 and ENT
(enter) buttons.
Press 0-9 to select a channel. The channel
changes after 2 seconds. Press ENT (enter) to
select immediately.
Use the CH +/- buttons to scan through the
channels.
CH
or
Tip
When you press and hold CH + or , the channel number
will change rapidly.
3 Adjust the volume using the VOL +/- buttons.
V0L
Other button operations
Press To
MUTING
DISPLAY
JUMP
Mute the sound. Press it again or press
VOL + to restore sound.
Press once to display the current channel
number/channel label and the Wide
Screen Mode, or the current video input
number video label and the Wide Screen
Mode. When the display is turned on,
the current channel number/channel
label or video input number.video label
remains displayed. Press it again to turn
the display off.
Jump back and forth between two
channels. The TV alternates between the
current channel and the last channel
selected using the 0-9 buttons.
3
42