Advertisement
Using your Heating Pad
Using your Heating Pad
• Remove all packaging.
• Ensure the power button on the controller is
in the off position.
• Connect the controller to the heating pad by
inserting into the socket.
• Insert the plug into the power outlet and
switch on.
• The heating pad will automatically default to
setting 5 (on Controller R67A3) or setting 4
(on Controller R90B1) for rapid heating, and
begin to heat up.
• Setting 5 (on Controller R67A3) or Setting
4 (on Controller R90B1) is for heat up only.
Do not use this setting for continuous or
prolonged use (or if you are likely to fall
asleep with it powered on).
• Place the heating pad (HPM5000,
HPM5100, HPM5200) on your shoulder,
arm, leg, behind your back or neck whilst
sitting or lying on a couch, chair or bed.
The versatile heating pad is a cozy and
comfortable addition to any lounge or
bedroom.
• (HPM5000 ONLY) You can use the sleeve
to secure the heating pad to a chair back or
around your arm or leg.
6
• To reduce the warmth, switch to a lower heat
setting. For continuous or prolonged use (or
if you are likely to fall asleep with it powered
on), select from settings 1-4 (on Controller
R67A3) or settings 1-3 (on Controller
R90B1) only.
• Use HPM5000, HPM5100, HPN5300,
HPM5200 and HPB5400 ONLY with
Controller R67A3.
• Use HPN5500 ONLY with Controller
R90B1.
Note: If the blue standby indicator light
on the controller begins to flash, turn the
controller off and check that the controller is
properly connected to the heating pad. If the
blue standby indicator continues to flash after
turning the controller back on, contact Sunbeam
customer service line.
Auto off function
• The heating pad features an auto shut off.
After 90 minutes (on Controller R90B1) or
3 hours (on Controller R67A3) operation,
the blue standby indicator light will show to
indicate the heating pad has switched itself
off.
Advertisement
