Table of Contents
Advertisement
4.5
Turning MULTI TIMBRE
on and off
The MULT!
TIMBRE
function allows external MIDI instruments operating on different channels to simultaneously use up to 16
tone colors. The following chart gives the channel number assignment.
Channel
6
HARPSICHORD
1
Channel 12
:
JAZZ GUITAR
a
Procedure
1) Make sure that the digital piano is in the programming mode. (See p. 6.4.1 "Entering the programming mode"'.)
2) Press the PIANO 2 switch to set the LED next to the PIANO 2 switch flashing.
3) Press the highest black key to turn the function off, the highest white one to turn it on.
4} Leave the programming mode.
(See p. 6.4.2 'Leaving the programming mode"'.}
Note:
When the power is first applied or reapplied after a short break, MULTI TIMBRE
is off.
&
Example
If the current MID{ channel
is 3, the upper half of the keyboard sends on channel 3 and the lower half sends on channel 4. If the
current channel is 16, the lower half sends on channel 1.
4.6
Turning LOCAL CONTROL on and off
LOCAL
CONTROL
refers to the connection between the internal sound source and the keyboard,
It is normally on. Turning it
off disconnects the keyboard; the instrument sounds only when it receives keyboard data through the MIDI interface.
The key-
board can still control other MIDI devices connected to the P2500/P1000's MID! OUT.
&
Procedure
1) Make sure that the piano is in the programming mdoe. (See p. 6.4.1 'Entering the programming mode".)
2) Press the PIANO 3 switch so that it flashes to indicate that the interface is waiting for a LOCAL CONTROL specification.
!
:
Flashes.
oO
.0' =o" 6
6
= oie
pongo
-.
—
HARPS!-
PIANO
PIANO
P
E-PIANO
ew
EHO?
CHORUS
1
2
1
3) Press the highest black key to turn it off the highest white one to turn it on.
#)
4) Leave the programming
mode. (See p. 6.4.2 '"'Leaving the programming mode"'.}
Note:
Momentarily turning off the power also turns LOCAL CONTROL on.
ofr
ON
2) Tuning
1} Make sure that the digital piano is in the programming mode. (See p. 6.4.1 "Entering the programming mode''.)
2) Press the E PIANO 1 switch so that it flashes to indicate that the piano is ready to be tuned,
Flashes.
é
é
0
0
O nll
O
6 cam
HARPSI-
oe
PIANO
PIANO
£-
E-PIANO
CHORD
CHORUS
2
3
2
1
Advertisement
Table of Contents
