Table of Contents
Advertisement
@
Examples:
fe)
10. 20
Oo
12
3.4
@ Press the "00" key and then
® Program No. 3
the 3°' key.
O
10 2
Or a.
3
4
@ Press the 20" key and then
® Program No. 20
the "0" key.
fe)
10 20
30 40
O42
® Press the "40" key and then
® Program No. 42
the "2° key.
3) Leave the programming mode.
4.4
Setting the channel
1) Make sure that the digital piano is in the programming mode.
{See p.6.4.1 "Enter the programming mode".)
2) Press the PLANO 2 switch so that it flashes to indicate that the interface is waiting for a channe! specification.
(tt is also possible
to turn the MULTI TIMBRE function ON and OFF.
See following section.)
Flashes.
oO 20: A
0
0
O
SOs = Flashes
HARPSI-
PIANO
P
uae
E-PIANO
E-PIANO
CHRD
{3
CHORUS
1
1
2
3) Select the channel by pressing the one of the first 16 white keys at the lower end of the keyboard.
TJS, SL 4] S[ 6] 7] 8] 9 41] 111 42 413] 14 | 45] 16
Note:
You have 16 channels to
choose from.
——-.
$m
Channel
No.
4) Pressing one of these keys automatically sets the instrument's sending and receiving channel to the number selected.
5) Leave the programming mode.
(See p.6.4.2 'Leaving the programming mode.)
Note:
When the power is first applied, the interface uses Channel 1 and has the OMNI parameter on. Changing to another channel
automatically turns the OMNI
parameter off. !n OMNI
mode, information from all channels is received,
Advertisement
Table of Contents
