Bosch KIV86 Series Information For Use page 22

en PRF IU template project
Malfunctions
Fault
The appliance is not cooling,
the displays and lighting are
lit.
The LED lighting does not
work.
The temperature differs
greatly from the setting.
The base of the refrigerator
compartment is wet.
The appliance hums,
bubbles, buzzes, gargles or
clicks.
The appliance makes
noises.
22
Cause
Showroom mode is switched
on.
Different causes are pos-
sible.
Different causes are pos-
sible.
The condensation channel
or drainage hole are
blocked.
Not a fault. A motor is run-
ning, e.g. refrigerating unit,
fan. Refrigerant flows
through the pipes. The mo-
tor, switches or solenoid
valves are switching on or
off.
Fittings wobble or stick.
Bottles or containers are
touching.
Super function is switched
on.
Troubleshooting
"Carry out the appliance self-test."
▶
→ Page 23
a Once the appliance self-test has
ended, the appliance switches to
normal operation.
Call customer service.
▶
The customer service number can
be found in the enclosed customer
service directory.
"Switch off the appliance."
1.
→ Page 14
"Switch the appliance back on after
2.
five minutes." → Page 14
If the temperature is too
‒
warm, check the temperature
again after a couple of hours.
If the temperature is too cold,
‒
check the temperature again
on the following day.
"Clean the condensation channel
▶
and the drainage hole." → Page 19
No action required.
Check the removable fittings and, if
▶
required, replace these.
Move the bottles or containers
▶
away from each other.
No action required.