Advertisement
1. Position guard and clamp into place so guard can be opened
or closed. Make sure maximum protection is provided to press
operator. Also make sure guard opens and closes properly.
2. (A) Make sure latch and latch mount are positioned so latch
catches pin on guard and that latch stays engaged. (B) Mark
location for latch mount and clamp into place.
STEP 1
Step 1
Position guard and
clamp into place so
guard can be opened
or closed. Make sure
maximum protection is
provided to press
operator. Also make
sure guard opens and
STEP 3
closes properly.
If your Norco product requires service or repair, contact the Norco
Customer Service Department for the location of the nearest Norco
Authorized Service Center.
Norco Industries, Inc.
365 West Victoria St.
Compton, CA 90220
(310) 639-4000 • Fax: (310) 639-7411
www.norcoindustries.com
SETUP INSTRUCTIONS
78035
Step 3
Drill holes for press guard
and bolt into place.
78035
REPAIR SERVICE
3. Drill holes for press guard and bolt into place.
4. Drill holes for latch mount.
5. Install guard and latch assembly with hardware provided.
STEP 2
Step 2
A. Make sure latch
and latch mount are
positioned so latch catches
pin on guard and that latch
stays engaged.
B. Mark location for latch
mount and clamp into place.
STEP 4 & 5
Step 4
Drill holes for latch mount.
Step 5
Install guard and latch assembly
with hardware provided.
It will be necessary to provide the Norco Authorized Service Center
with a copy of the bill of sale if requesting warranty repair. If the
authorized service center determines your product is eligible for
warranty repair, the repair will be made at no charge and returned
freight prepaid. The cost of non-warrantable service, repair, and
return freight is the customer's responsibility.
A.
Step #2
B.
78035
78035
78035
Advertisement
