Electrical Connection.4 - Riccar Serger Instruction Manual

ACCESSORIES
ELECTRICAL CONNECTION
Connect the electncal cord to the machine by inserting
the three-hole plug into the terminal bo* located on the
right side of the machine Connect the cord plug into
an electrical outlet.
Place Foot Control on floor where it is easy to reach
with your foot
To make machine go faster, press down on Foot
Control: to slow down let up slightly
CAUTION
1. Disconnect the electncal cord from the wall
outlet when machine is not in use or when it is
being cleaned.
2. Disconnect the electncal cord from the wall
outlet before changing needles or throat
plates This will help prevent accidents.
4