Riccar Serger Instruction Manual page 5

INSIDE OF FRONT COVER AND FREE ARM
COVER
23. Needle Bar Thread Guide
24. Upper Knile Holder
25. Upper Knife
26. Presser Fool
27. Throal Plate
28. Feed Dog
29. Seam Width Knob
30. Upper Looper
31. Lower Looper
32. Lower Knife
ACCESS TO THREAD GUIDES
AND FREE ARM
1. Place thumb in hollow of front cover and slide it to
the right as far as possible; pull cover down toward
you.
2. To close, lift cover up and it will snap into place.
3. Be sure that the cover is properly closed before
starting to sew
Opening the Extension Table
1. Turn lever located on left side of Extension Table
toward front of machine.
2. Pull Extension Table out to open
3. To close shut and trim lever in opposite direction.
This locks the Extension Table to Free Arm Cover
Removing the Free Arm Cover
Swing Extension Table out with lever in locked position
and Free Arm Cover will stay attached to the Extension
Table.
3