System Configuration - Furuno WV-100 Installation Manual

SYSTEM CONFIGURATION

Gyrocompass,
Wind Sensor *1
Antenna Unit
GPS Navigator
Intelligent HUB
Processor Unit
Firewall
LAN1
HUB-3000
Wave analysis PC
*2
PC for wave analysis
(Local supply, wave analyzer
software installed in PC)
Control Unit Monitor Unit
*1 : For wave analysis, required wind
direction/speed data from the
wind sensor. The data should be
directly input to the radar, or
available on the network via
CHART RADAR FAR-3xxx series
sensor adapter.
or
MARINE RADAR FAR-2xx8 series
*2
: The PC should be connected to the
LAN1 port during wave analysis.
ii