Table of Contents
Advertisement
1. Take out Cooking Blender. Clean the lid and glass
container with water, and wipe the outside surface of
the base with soft wet cloth. Do not immerse any
working electrical components such as the base, jar, and
power cord in water; do not spay water on any part
containing electrical components.
2. Clean the ingredients. Cut them smaller than ½ inch or
1cm and put them in the container. Add water
maximum hot contents 1000ML / maximum cold
contents 1200ML.
3. Install the lid plug on the lid, turn the lid clockwise and
lock it with the glass container tightly.
4. Plug the power cord into an available 120V AC wall
outlet. Control panel display "- - "
5. Rotate the rotary knob to switch over its functions.
When switching to the required function, press the
rotary knob to enter the cooking state.
HOW TO USE
5
Advertisement
Table of Contents
