Before First Use; Specification - Narita NSM-866 Operation Instruction Manual

Before using for the first time, it is recommended to clean the interior of the blender
thoroughly. Please follow the procedures below before using the blender:
1. Read all instructions and important safeguards.
2. Remove all packing materials and make sure that the product has been received in good condition.
3. Take care to keep the electrical components on the exterior of the base dry, wipe out the interior of the
kettle with a damp cloth. Please your hand will not fit inside the glass container.
4. Rinse out the inside of the glass thoroughly with water.
5. With a damp cloth, gently wipe off the exterior of the glass. Do not wipe off electrical components as this
may cause damage to the unit.
6. Dry all parts completely.
7. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or
damage to the blender. A scraper may be used but must be used only when the blender is not running
(does not apply to an acceptable scraper integral with the appliance).
★ Blades are sharp. Handle carefully.
BRIEF INTRODUCTIONS:
Thank you for purchasing the Narita Multi-Function Electric Cooking Blender. Please follow these simple
tips to get the maximum performance and satisfaction from this appliance. Use according to our
instructions and it will give you years of trouble-free enjoyment.
MODEL
NSM-866

BEFORE FIRST USE

SPECIFICATION

RATED RATED
VOLTAGE FREQUENCY
120V 60Hz
POWER
CONSUMPTION
Heating 800W
Stirring 300W
3
CAPACITY
Cold 1200ML
Hot 1000ML