Selecting The Ring Time (On The Base Phone Only) - Sony ClearScan25 SPP-AQ600 Operating Instructions Manual

Setting up the answering machine (continued)
To change the greeting
Do in the same way as described on the previous page. The new
greeting replaces the old one.
To erase the greeting
1
Press
(
FLASH/REMOTE ).
2
Press ERASE/®.
3
Press GREETING/®.
4
Press
(
FLASH/REMOTE
)
again.
Selecting the ring time (on the base phone only)
You can select the number of rings before the phone answers to take
a message.
There are three modes. .5, and TS (Toll saver).
1
Press
(
FUNCTION ).
2
Press ®.
3
Press
(2) «'■ GD
select limes", ".'i time.s". or "Toll saver".
To answer after ?i rings, select '3 times".
To answer after 5 rings, select "5 times".
Select "Toll saver" to answer after times when there is a new message and
after .S times when there is no new message.
4
Press ®.
You will hear a long confirmation beep.
Note
Do iioi allow more than 20 sccoiuls lo elapse hoivveen eacli step of the procedure.
26
™
Using as a telephone answering machine