Panasonic PV-DM2792 Operating Instructions Manual page 23

Equipped with _l'z _ -TV Noise
Reduction for true MTS
reproduction, tlrczz _ -TV Noise
Reduction is required for good
stereo separation and audio fidelity.
tl_x _ is a registered trademark, and
is liceosed by cR:__ Technology
Licensing.
The following are possible audio broadcast types and
on-screen displays. The signal being received is indicated
with an" [L, " mark while the selected audio mode is indicated
with an arrow. To change the audio mode for these
broadcasts, see the "Select Audio Mode for TV Viewing"
sectier_ (beIow.)
Press DISPLAY to display
the broadcast
signal being
received.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo
lmaJr_language) and Secondary Audio
Program (sub laoguage) broadcasts are
being received simuRaneouely.
Select the STEREO or SAP audio mode.
AUDIO
DISPLAY
_DaD_
(3D C_D _ /
M'fS Stereo b_oadcast
MuRi-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
• If stereo broadcast is weak and the
disp}ay flickers, select MONO audio
mode for possibly better results.
SAP broadcast
Secondary Audio Program
(sub language).
Select SAP audio mode for the sub
language.
MONO broadcast
Normal monaural sound broadcast.
< Example >
I
Press AUDIO
Press AUDIO to select the desired audio mode
as described above,
(Arrow shows selection,)
• Each press of AUDIO will change the audio mode as shown
below.
• "SAP" is selected with first press of AUDIO.
,Pres
23