Panasonic PV-DM2792 Operating Instructions Manual page 19

Connections you'll need to make Recording (Editing)
unit
Playing (Source) VCR
R-AUDIO-LVIDEO
IN FROM
@ ANT.
1
2
Insert pre-
recorded tape.
Insert blank tape
with record tab.
• Dubbing tapes protected
with Copy Guard will have
poor quality results.
Select "LINE" mode.
See "Selecting Input Mode" below.
I PAUSE at starting _ _ i press PLAY then point to put in
Standby mode.
I Press REC, then
REC
STILL/PAUSE
I
Press STILL/PAUSE
{_ _ I immediately to
put in
Standby mode,
(Perform operation of steps 4 and 5 on both units at same time.)
Press PLAY Press STILL/PAUSE
to start dubbing. STILL/PAUSE to start dubbing.
5
Press STOP
to stop dubbing.
STOP
Press STOP
to stop dubbing.
0
• Unauthorized exchanging and/or
copying of copyrighted recordings
may be copyright infringement.
• Please note that some tapes
cannot be dubbed on this unit.
Also, it is not possible to dub
DVD/Video CD/CD to VHS tape
using this unit.
Method 1 :
Press CH AV. The display will change as follows.
Method
2: _MNE_ _ 1_-_2/CABLE )4-b3_ TV)
a Press ACTION for MAIN MENU.
b Press AV_I • to select "TV", then press SET
for SET UP TV screen.
c Press AV to select "INPUT SELECT," and
then press SET to select "TUNER" or "LINE"
d Press ACTION twice to exit this mode.
19