Download Print this page

ABB PrimEvo XT100E Instruction Leaflet page 2

Advertisement

INSTALLING AND CONNECTING
Carefully read this instruction leaflet before installing or using the luminaire. This leaflet provides important
information about the correct installation, use, maintenance and disposal of this product.
Please observe the following guidelines:
1. The luminaire should only be installed by qualified personnel and the installation must be in accordance
with European installation requirements HD 60364 and additional local regulations.
2. This product may not be modified in anyway what so ever or used for a purpose or in an
environment other than for which it is designed. Failing to observe these guidelines will invalidate the
warranty and the CE-compliance of this product.
3. Before installing the luminaire, the supply must be isolated.
4. The light source in this luminare is non-replaceable.
5. The luminaire should be connected to the voltage 220-240v 50Hz.
INSPECTION AND MAINTENANCE
Emergi-Lite strongly advises annual inspection of your emergency lighting installation.
EXPLANATION
Maintained
Green LED
Non-maintained
BATTERY
A fault will occur when test results for duration no longer meets the requirements indicated for the luminaire.
The luminaire must then be replaced. Please see the label on the batteries for the type required. Given the
technical life of the battery, it is recommended to replace them after 4 years.
PLEASE NOTE!
Constant voltage is required and the batteries must be sufficiently charged for emergency lighting to
function properly. Failure to observe this requirement can damage the batteries, the lightsource or in
worst-case scenario, the luminaires electronics.
PHOTOMETRIC DATA
141N TC242IND04

Advertisement

loading