2. Connections
Touchscreen monitors typically provide their touch interface over USB. This was traditionally a USB B type
connector at the back of the touchscreen, but USB C is becoming increasingly popular too.
The required cable depends on the connector at the back of the touchscreen monitor. The KDS controller
box always takes the USB A type end of the cable, while the USB B or C type end of the cable goes to the
touchscreen.
Form: F-730-028 v1.00
Picture 2.1
USB C to touchscreen
USB A to KDS controller box
Picture 2.2
USB B to touchscreen
USB A to KDS controller box
Epson TrueOrder KDS
Touchscreen User Manual
Page 4 of 11
Trademarks
111-56-URM-001
R3.00