Changing The Paper Size For Optional Tray Unit.43 - Savin 9920DP Operating Instructions Manual

CHANGING THE PAPER SIZE
0 With
[T
Prev.] and
[i
Next] keys,
move between pages to find the
paper size you want to select.
© With the <9 and B> keys, select
the paper size then press the [OK]
key.
© Press the User Tools key.
The user tool setting is changed.
__
<Special>Tray2 3/5 Select withdB-
FiiSBiEiT
8x10^5° 8x10*
D
11x14°
10x14°
1 tPrev. If ANext if- Cancel li ~~\OK 1
1_1 1_1 1_1 1_1
<ss>
Irregular paper size
□ Regarding irregular paper sizes, => see page 22.
0 Press the [Irreg.] key.
0 Enter the vertical size using the Number keys and press the ® key.
© Enter the horizontal size using the Number keys and press the [OK] key.
© Press the User Tools key.
The user tool setting is changed.
Push the paper tray in until it stops.
□ The loaded paper size and direction are displayed on the panel display.
□ "*" is displayed on the panel display when you load irregular size paper.
Changing The Paper Size For Optional Tray Unit
H| Change the paper size following the previous steps
D->O->0->0->0
Q on pages 40 ~ 43.
43