Advertisement
DAT (digital audio tape deck)
DAT (not included)
ANALOG
INPUT
OUTPUT
Oo
©
(R) (L)
(RR) (L)
Stereo connection cable
(not included)
(R) (tL)
(R) (L)
DAT
PLAY (IN)
Sound processor
@ SETTING THE TIME OF DAY
1 24-68
3°5°/
These instructions explain how to set the time for 16:25 (4:25 p.m.)
on Wednesday.
Switch on the power.
1
Press CLOCK/TIMER to select '"'CLOCK"'.
The display will show CLOCK.
The display will return to what was previously indicated if you
allow 7 or more seconds to elapse before you accomplish the
next operation.
2
Press SET.
The day indicator will start to flash.
SA-CH750
Video disc player
Video disc player (not included)
AUDIO
VIDEO
OUTPUT
OUTPUT
(R) (L)
Video connection cable
(not included)
Stereo connection cable
(not inlucded)
Sound processor
3
Press one of the SELECT
buttons to select
"WED''.
Flashing
Press SET.
Press one of the SELECT buttons io select
"4
6''.
Going from 23:59 to 00:00 on the hour display willnot change
the day display.
ak
6
Press SET.
7
Press one of the SELECT buttons io select
95"
Going from 59 to 00 on the minute display will notchange the
hour display.
cio
—<$_—
8
Press SET to finish setting the time.
After about 2 seconds, the display will return to vhat it were
before entering the clock setting mode.
To display the clock again, press CLOCK/TIMER. Thedissplay will
show "CLOCK", and then clock will appear for 5 secons,
"E" appears on the display if the power cord has been oicee discon-
nected or there has been a power failure. If this happen, reset the
time.
Advertisement
