Summary of Contents for EVB BCPP-A1-16
- Page 1 Portable EV Charger User Manual www.evb.com WWW.EVB.COM VERSION: 20231121-01...
-
Page 2: Table Of Contents
Portable EV Charger Portable EV Charger evb.com evb.com CONTENTS 1. Safety Information 1. Safety Information Thank you for purchasing and using the Benyi electric vehicle mode 2 charger. This document contains important instructions and warnings that must be followed when using and maintaining the EV Charger. -
Page 3: Product Appearance
2.2. Product Specification Parameter description Parameter Model BCPP-A1-16 The charger is designed according to lEC 62752, IEC 61851-21-2 standard, mainly consists of control box, charging connector, plug and etc... IEC 62752,IEC 61851-21-2 Standard Which is a portable electric vehicle charging device. It enables car owners to charge electric vehicles anywhere using a standard home power... -
Page 4: Product Packing List
Portable EV Charger Portable EV Charger evb.com evb.com 2.4. Product Packing List 2.6. Product Features Build-in with Over Current Protection, Over Voltage Protection, Under Voltage Protection, Over Temperature Protection, Relay Adhesion Protection, Ground Protection, CP Signal Abnormal Protection, Fire Protection, Anti-pressure Protection and Type B Leakage Protection. -
Page 5: Oled Screen Description
Portable EV Charger Portable EV Charger evb.com evb.com 3.2. OLED Screen Description Fault Status Press Left and LED Lights Status OLED Screen Status EV Charger Status Potential Cause Action Press Left Key Press Right Key Picture Status Right Together Emergency Stop... -
Page 6: How To Set Charging Current
Portable EV Charger Portable EV Charger evb.com evb.com 5. How to set charging current 7. How to emergency stop charging Press both at Press both at same time same time Reserve: 0h Press the left Press the left to to select current... -
Page 7: Permanently Turn Off The Ground Detection Setting
Portable EV Charger Portable EV Charger evb.com evb.com 9. Permanently turn off the ground detection setting Double-click to enter the setting interface Reserve: 0h Double-click and hold for 5s to enter the ground detection setting interface Click the left Turn off...