Mode; And Tuner Stations - Onkyo TX-DS797 Instruction Manual

Enjoying music or videos with the TX-DS797
Listening mode buttons
DIRECT •/&
SETUP ENTER
@
= _ ¸¸2¸:¸2 ¸¸
®@@e@® ®@@
</•
input source buttons RETURN
Listening
mode
buttons
I Changing the listening mode
To change the listening mode during playback, press the listening
mode buttons.
The functions of the buttons on the TX-DS797 and those on the
remote controller are the same.
TX-DS797 Remote controller
If sun'ound back speakers are no1 connected, you cannol select THX
Surround EX, DTS-ES Discrete 6.1, or DTS-ES Matrix 6.1.
DSP _1_: Changes the listening mode as shown below.
Mono --_Direct --> Stereo --> Theater-Dimensional -_ Surround* --_
THX* --_ Mono Movie --_ Enhanced 7 --> Orcheslra --> Unplugged
--_ Studio-Mix --> TV Logic --> All Ch Stereo -_ Mono.
If pressed, the listening mode for the selected input source set in the
Lislening Mode Preset is also changed.
* The display will differ depending on the format of the current
signal.
DIRECT: Changes the listening mode directly to the Direct
listening mode. If pressed, the listening mode for the selected input
source set in the Listening Mode Preset is also changed to the Direct
listening mode.
STEREO: Changes the listening mode directly to the Stereo
listening mode. If pressed, the listening mode for the selected input
source set in the Listening Mode Preset sub-menu is also changed to
the Stereo listening mode.
SURROUND (SURR): Changes the listening mode to the surround
mode for the current input signal (e.g. Dolby Pro Logic ll, Dolby
Digital, or DTS). If pressed, the listening mode for the selected input
source set in the Listening Mode Preset is also changed to the
Surround listening mode.
When the Surround listening mode is selected
• When playing back DTS sources
Swilches 1he DTS-ES setting from Aulo --_On --_ Off.
• When playing back Analog/PCM sources
Switches from Pro Logic II Movie --> Pro Logic lI Music --_
DTS Neo6:Cinema --> DTS Neo6:Music.
• When playing back D.F. 2-channel sources
Swilches from Pro Logic II Movie --_ Pro Logic II Music.
THX: Changes the listening mode to the THX lislening mode.
When the THX listening mode is selected
• When playing back Dolby Digital sources
Switches the THX Surround EX mode (Auto --> On -_ Off) if the
source is a Dolby Digital-compatible source.
• When playing back Analog/PCM sources
Switches the decoding mode (Pro Logic II Movie --_ DTS
Neo6:Cinema) for THX processing.
• When playing back DTS sources
Allows you to enjoy the DTS THX Cinema, DTS-ES Discrete 6.1
THX Cinema, and DTS-ES Matrix 6.1 THX Cinema surround
systems. The DTS-ES mode changes fi'om Aulo --_ On --_ Off.
I Entering names for input sources and tuner stations I
You can enter names for your components or radio station names as
names for your input sources and have them displayed in the front
panel display when thai input source is selected. (see page 36)
Entering characters using the TX-DS797:
1. Press the SETUP button.
2.
3.
4.
5.
Press the • button to select the "2.1nput Setup" menu and
press the ENTER button.
Press the • button to select the "Character Input?" sub-
menu and press the ENTER button.
Press the • button to select "Char: "and press the • button.
The screen changes to show you the characters you have
already entered (< >) and then automatically changes to the
Character Selection screen (ABCDEF...).
Press the &, •, •, and • buttons Io select the character you
desire and press the ENTER butlon. The screen again shows you
the characters entered for approximately two seconds and
returns you _o the Character Selection screen.
If you enler an incorrect character, press the RETURN button to
move the cursor lo the lefl and re-enter the character.
Repeat the above operations to enter up to 10 characters. When
you m'e finished, the entered name appem's.
6. Press the SETUP button to complete the procedure.
To correct entered characters
Perfonn sleps 1 to 4 given above. After perfonning slep 4, press the
• button to display a name that has already been enlered. Press the
ENTER button to move the cursor to the localion of the character
that you want to change, enter the new character, and press the
ENTER button.
To delete an entered name
Perform the sleps 1 to 3 given above. At step 4, press the • button.
51