DMX SOUNDLIGHT 3408LC-H RDM Mk3 Operating Manual

Booster/splitter

Table of Contents

Download this manual

last updated 23-05-18

OPERATING MANUAL

DMX Booster/Splitter 3408LC-H RDM Mk3

PRODUCED, DUPLICATED OR USED COMMERCIALLY WITHOUT THE PRIOR WRITTEN CONSENT OF

THE OWNER *

ALL STATEMENTS WITHIN THIS MANUAL HAVE BEEN CHECKED CAREFULLY AND

ARE BELIEVED TO BE ACCURATE, HOWEVER SOUNDLIGHT DOES NOT ASSUME ANY RESPONSIBI-

LITY FOR ERRORS OR OMISSIONS. * SOUNDLIGHT ALSO RESERVES THE RIGHT TO CHANGE OR

MODIFY PRODUCTS OR PRODUCT FEATURES DUE TO TECHNICAL PROGRESS WITHOUT PRIOR

NOTIFICATION * THIS PRODUCT IS INTENDED FOR USE IN ENTERTAINMENT LIGHTING SYSTEMS

* THE USER HAS TO CHECK THE SUITABILITY OF THE EQUIPMENT FOR THE INTENDED USE.

SOUNDLIGHT EXPRESSLY EXCLUDES ANY RESPONSIBILITY FOR DAMAGES - DIRECT OR INDI-

RECT - WHICH MAY OCCUR DUE TO WRONG APPLICATION, MISUSE, IMPROPER INSTALLATION,

WRONG OPERATING CONDITIONS AND NON-COMPLIANCE TO THE INSTRUMENT'S INSTRUCTIONS,

AS WELL AS IGNORANCE OF EXISTING SAFETY STANDARDS OR REGULATIONS.

SOUNDLIGHT

The DMX Company Bennigser Str. 1

D-30974 Wennigsen

Tel +49-5045-912 93-11

Table of Contents

Need help?

Do you have a question about the SOUNDLIGHT 3408LC-H RDM Mk3 and is the answer not in the manual?

Page 1 RECT - WHICH MAY OCCUR DUE TO WRONG APPLICATION, MISUSE, IMPROPER INSTALLATION, WRONG OPERATING CONDITIONS AND NON-COMPLIANCE TO THE INSTRUMENT'S INSTRUCTIONS, AS WELL AS IGNORANCE OF EXISTING SAFETY STANDARDS OR REGULATIONS. SOUNDLIGHT The DMX Company Bennigser Str. 1 D-30974 Wennigsen Tel +49-5045-912 93-11...
Page 2 The SOUNDLIGHT DMX Splitter/Booster 3408LC-H is a highly sophisticated device, which was designed to buffer and distribute DMX light control signals complying with USITT DMX-512/1990 or DIN 56930/2, ANSI E1-11 DMX512-A and ANSI E1-20 DMX RDM, respectively. The unit can be used with all standard light con- trol systems.
Page 3 This type of connector is very reliable, ruggedized and ea- sy to use. Always use a flat blade screwdriver only. For stranded wires, we strongly suggest to use (insulated) ferrules. The DMX data outputs are optically isolated in respect to to the DMX si- gnal input. DMX INPUT...
Page 4 Multiple units can be operated and wired in parallel. To expand the number of outputs, simply connect the next splitter to the DMX THRU port. Do not connect additional splitters to the OUT ports, since this will shorten dicovery response telegrams.
Page 5 Warranty is void: - when modifying or trying to repair the unit without authorisation; - modification of the circuitry; - damages by interference of other persons; - operation which is not in arccordance with the manual; - connection to wrong voltage or current; - misuse.