Summary of Contents for DMX Soundlight 3404C-FG RDM Mk1
Page 1
DAMAGES - DIRECT OR INDIRECT - WHICH MAY OCCUR DUE TO MISUSE, UNPROPER INSTALLA- TION, WRONG OPERATING CONDITIONS AND NON-COMPLIANCE TO THE INSTRUMENT'S INSTRU- CTIONS, AS WELL AS IGNORANCE OF EXISTING SAFETY REGULATIONS. SOUNDLIGHT The DMX Company Bennigser Str. 1 D-30974 Wennigsen Tel. 05045-912 93-11...
Page 2
1x DMX IN, 2x DMX OUT opto-isolated, with Display 19“ rack mount units: 3405A-FG 19" rack mount unit 1x DMX RDM IN, 1x DMX THRU, 1x DMX OUT, 4x DMX RDM OUT, opto-isolated, with Display 3408A-FG 19" rack mount unit 1x DMX RDM IN, 1x DMX THRU, 8x DMX RDM OUT,...
Page 3
The booster/splitter is using cage clamp terminals for both, input and output. This type of connector is very reliable, ruggedized and easy to use. To open, press lever, insert cable and release. Contact assignment: The DMX data outputs are optically isolated, and are GND- and potential-free referenced to the DMX signal input. DMX INPUT...
Page 4
3404C-FG / 3405A-FG / 3408A-FG DMX RDM PROPERTIES The splitter can process DMX512, DMX512-A and/or DMX RDM telegrams. In respect to RDM traffic, the splitter acts as "invisible" device, which cannot be discovered or ad- dressed. Please refer to the relevant product page (see below) for more information regarding RDM properties.
Page 5
LIMITED WARRANTY This instrument ist warranted against defects in metarials and workmanship for a period of 12 month, begin- ning with the date of purchase. The warranty is limited to repair or exchange of the hardware product; no fur- ther liability is assumed. SOUNDLIGHT is not responsible for damages or for loss of data, sales or profit which arise from usage or breakdown of the hardware product.
This manual is also suitable for:
Soundlight 3405a-fg rdm mk1Soundlight 3408a-fg rdm mk1Soundlight 3404a-hSoundlight 3404b-hSoundlight 3404c-hSoundlight 3404lc-h...
Show all
Need help?
Do you have a question about the Soundlight 3404C-FG RDM Mk1 and is the answer not in the manual?
Questions and answers