Table of Contents
Advertisement
Vehicle Settings Using the Multi-Function Display
B – Coolant temperature
A
Bar in left area – engine cold
B
e Avoid high engine speeds and heavy engine
C
loading.
Bar in centre area – normal operating
D
temperature
E
Pointer may move up to the red area when the
F
engine is heavily loaded and outside temperature
is high.
G
Bar in red area – operating temperature too
H
high
I
NOTICE
J
Risk of engine damage.
K
If the coolant temperature is too high, the coolant
temperature gauge needle moves to the
L
maximum mark. A warning message indicating
M
that the engine temperature is high appears on the
multi-function display and the warning light lights
N
up or flashes.
e If the red zone is reached, stop immediately
O
in a suitable place and switch off the engine.
P
Do not continue driving.
e Initiate measures to reduce the coolant
Q
temperature:
R
f Refer to chapter "Warning and Information
S
Messages" on page 278.
T
If the coolant level is low, warning messages
may appear if the vehicle tilts at an extreme angle
U
(e.g. steep slopes) or generates high lateral
V
acceleration while travelling around long bends
(e.g. driving in circles). If the warning messages
W
do not disappear once the vehicle has assumed
X
"normal" operating state, check the coolant level.
f Refer to chapter "Checking coolant level and
Y
adding coolant" on page 95.
Z
264
C – Engine oil temperature
A warning message appears on the multi-function
display if the engine oil temperature is too high.
e Reduce engine speed and load immediately.
f Refer to chapter "Warning and Information
Messages" on page 278.
D – Engine oil pressure
The oil pressure is controlled as required and
should be at least 3.5 bar (51 psi) at an engine
speed of 5,000 rpm.
The engine oil pressure varies depending on the
engine speed, oil temperature and engine load.
NOTICE
Risk of engine damage.
If the oil pressure is too low, a warning message
appears on the multi-function display.
e If the oil pressure is too low, stop immediately
in a suitable place and switch off the engine.
Do not continue driving.
e Initiate measures to increase the oil pressure:
f Refer to chapter "Warning and Information
Messages" on page 278.
1. Vehicle e Settings e Display e
Vehicle menu e Field 1 or Field 2 or
Field 3 or Field 4
2. Select the desired display contents:
– Battery voltage
– Boost pressure
– Oil pressure: Engine oil pressure
– Oil temperature: Engine oil temperature
– Coolant temp.: Coolant temperature
– Fuel Range
– Dst: Arrival: Arrival time and distance to
destination or stop
– Dst: Trip time: Trip time and distance to
destination or stop
– Compass
– GPS altitude: Height of vehicle above sea level
– Time
– Date
– Station/Track: current radio station or music
track
– Phone status: network strength or network
name
– Blank line: line remains empty
Adapting lower status area
1. Vehicle e Settings e Display e Lower line
2. Select the desired display contents:
– Time
– Temperature
– Time & Temp.
Advertisement
Table of Contents
